PAUTIX RGB Smart IC COB LED Strip Light Addressable 24ft/7.5m,UL-Listed DC24V Color Flowing Strip Light Multicolor Flexible Tape Light for TV,Bedroom,Party DIY Decoration(Without Controller&Adapter)

So, I recently got a Bambu X1C 3D printer. Which is amazing, but the LED light inside it is kinda weak.I went on a product search journey to try and find a light to add to it. At first I thought this would be like a 5 minute shopping trip on Amazon, but it turned out to take hours to find the right product that wasn't disappointing in one way or another. Many LED light strips that I saw, had really far spaced apart LEDs, like a few inches apart, and I thought that looked trashy. So I found this LED strip, which has the LEDS soooo close together, you dont really notice them unless your really really looking. That made me happy.Also, the LED's on here are RGB, and independently addressable. Which means, instead of having to have all LED's the same color at the same time, like with most strips I found, I can have each set of LEDs any color I want, allowing cool effects.I'm using the PAUTIX SP511E controller and their 24v 5a power supply with this, so I can control it via remote, or via Google Assistant with my voice. Setting that up was pretty easy, and I'm impressed with how many commands I can give it. Like I was able to name it, so I can say things like "Hey Google, turn on the light for my 3D Printer". Can also change modes (like rainbow, or solid color, or some other animated effect), change brightness, and change speed of animations.Overall, I'm glad that instead of spending 5 minutes shopping, I took the time to really dig into what makes an LED strip good/bad, and find one that had all the features.

Lights are super bright tbh an so much color options an can be dim super low got in realityore then 147 option. Cause even In music setting you got those plus can change the speed an lengths super satisfied with my purchase

These are some of the best led strip lights you can buy, have had them installed and in use for about a year now. One thing to note is there is voltage sag with these if you attach two in series, resulting in a slight green tint towards the end of the strip.

The media could not be loaded. I bought these as the most fitting candidate to dress my Ausom F1 Max. They're bright (brighter than I even expected), waterproofing so far has done well, and were simple to apply and cut where needed. Only reason I gave it a 4/5 is because necessary parts aren't included, for whatever reason, and nothing tells you the waterproofing plastic needs to be cut and slightly removed to be able to rewire the LEDs. Thanks for that. Spent way too long wondering how the hell that would work only to feel dumb.Otherwise, the adhesive seems good even though I used 3m car tape to make sure it stays. Works perfectly. Good stuff. Would buy again.

As many people did, I purchased two 16’ strips without the controller and power supply. At first the strips would only illuminate the red LEDs. I was using a 12v supply, and that was the problem. Once I switched to a 24v 7.5a supply everything came alive. I sent an inquiry to the vendor about the issue and Bella replied quickly with the answers I needed.I love the product’s capabilities and brilliance. But it’s the customer service that gives the product it’s 5-stars.

I purchased these lights again thinking I could use them for a better project....wrong. the quality is crap now. As long as you don't cut the lights you will be ok. There are cracks in the lights and the lights are not working all the way the through. The clips and wiring provided doesn't work and I have wasted 3 days putting these lights up and wiring them just for them not to work! I am so disappointed. I used their one color lights where I cut and wired with no problem so I have experience with this. I have wasted my time ans my money and cannot even find a way to contact customer service. What a waste! The clips only give you 3 of the ones that you will really need for your project and one you lock them, there is no way to unlock them. After getting it all wired and cut I find there is a defect in the strip. And I really cannot even tell if the wiring or the clips work.

The media could not be loaded. I put these in my Home Theater behind the crown moulding above the projector screen. The controller is in the room on the other side of the wall so I used an external plugged into the controller so the mic is in the Theater. I used the SP086 controller which need some work, ill talk about that when I review the controller, but the Leds themselves are awesome and I will be updating the old Leds in my kitchen with these soon.The adhesive on the back is very good and this companys connectors they sell also work good with these strips, you just have to get the right ones. In case your wondering who the singer is, this Is John Schlitt performing on the Mike Huckabee show John used to be lead singer for Head East and then was Lead singer for PETRA a Christian rock band that is currently doing their 50 year reunion tour! I set up a scene on the controller to mimic the colors used on stage of the video.

Lo puse en mi tv y se ve genial 😀