SONOFF SNZB-02D Zigbee LCD Smart Temperature Humidity Sensor,Works with Alexa/Google Home, SONOFF ZigBee Bridge Is Required, Battery Is Included

I bought these to use with Home Assistant, and the setup was surprisingly easy. They connected quickly and were recognised without much effort, which is always a bonus when dealing with smart home devices. The screen is fairly simple but clear, showing the temperature in a way that’s easy to read at a glance. It doesn’t try to do anything overly complicated, which I actually prefer. The temperature readings also seem very accurate based on what I’ve compared them with around the house. For the price, they offer really good value and do exactly what I needed them to do. Overall, a straightforward and reliable option if you want an affordable temperature sensor that works well with a smart home setup.

You know how the things are looking like when you are a home automation fan? You have plenty of sensors and screens in the house but you still don't have enough. ☺️ Despite the fact that I already have in all the rooms accurate temperature/humidity sensors from Shelly - connected via Bluetooth, I noticed that there is a long way until someone (ok, my wife as always 😂) will actually read their values using the screens from the walls or phones. This encouraged me to look for some simple and nice looking screens, but also having a good quality and durability. Considering that I'm already using several other gadgets from Shelly, Zooz, Aeotec, Philips, Innr, Zipato, TpLink and Sonoff and I'm very happy with their simplicity and quality, my choice was mainly made by the price and offers that these brands were offering at the moment of buying. Therefore, I found that Sonoff came with the best balance price/quality. Connectivity was not so important as I'm using both Zigbee and Z-Wave protocols (AEOTEC for Zigbee and ZOOZ for Z-wave). I knew, therefore, that I'll have no issues connecting a SONOFF sensor to an AEOTEC zigbee module. Functionality is good, see the picture attached. This is also confirmed by the Shelly temperature/humidity sensors from the house. The screen is simple and has a nice contrast and if I have no complaints from my wife, then it worked 100%. 😎 There are two variants of attachment. On the wall using a strong magnet and on the table. What I like about them is that on the wall you can stick the magnetic part using 3M double tape already attached. That plastic part is like a pocket for the sensor, you can - if you want to move the sensor somewhere more visible or you wany to measure the temperature in a different place - you can literally take the sensor from its pocket and place it on a table. Battery type is CR2450. I bought the pack of two sensors and I had to replace the battery to one of them as it was empty, while the other one had a full battery. I had a Duracell CR2450 spare battery already so this was a simple fix for me. Not sure about the battery life overall, I'll be back here later for updates regarding this matter. But the lesson will be from this episode to have a CR2450 spare battery as you never know when you need one ;)

I’m using these SONOFF SNZB-02D temperature and humidity sensors alongside the SONOFF Zigbee Bridge Pro to automate tasks across my property. They’re installed in outbuildings to monitor environmental conditions, and when thresholds are reached, they trigger smart plugs and appliances such as heaters, fans, or dehumidifiers. The sensors are accurate, responsive, and integrate well with the app. Important note: these sensors require a Zigbee bridge to function as smart devices. Without one, they simply act as standalone digital gauges with no automation or remote monitoring. Once paired with the bridge, they unlock full smart functionality. Setup wasn’t flawless, which is why I’ve rated them four stars. Pairing was a bit fiddly at first, but after speaking with SONOFF support, I learned that connecting and updating the sensors close to the hub or router makes a big difference. Once I followed that advice, they paired quickly and worked reliably. The LCD display is clear and easy to read, and having both temperature and humidity data available remotely is a huge plus. Signal range varies depending on walls - in my wooden cabin, the sensor works fine at around 15 metres. In my brick garage, the signal weakens at just over 6 metres, so placement matters. Battery life initially was quite short, but after replacing with a branded battery, they seem to be lasting a lot longer. They’re not the cheapest sensors out there, but the functionality and integration make them worth it if you’re building a smart automation setup. Just follow the pairing tip and make sure you’ve got a compatible bridge.

Great little temp and humidity gauge. Accurate and worked perfectly for me with ZHA in HA. Paired within a couple of seconds and has been rock solid for me for 9 months now. Obviously, you can use it in automations, and I have it controlling a Sonoff TRV(excellent piece of kit) in the attic, turning it on when it gets below a certain temp, then turning it off when it gets too warm. Have no hesitation in buying it, top notch. Just be aware that it uses a CR2450 battery, which is not that easy to get. I live in Ireland, and the best price I got was from Viking Direct, 4.50 euros for 2 and 5 euros for delivery.

Before deciding on a very simple room temp / humidity meter I did an extensive research. I only wanted an accurate one, and browsing through dozens I started giving up on the idea. Then I thought, hell if it’s not that accurate at least it should be SmartThings friendly. That’s how I found this product. The official website mentions a +/-0.2C temp accuracy and a +/-2% RH humidity accuracy, which I truly found a bit far fetched as most sensors allow tolerance of exactly or above 0.5C for temp and 5% for humidity, which are quite huge if you think about it. So while 0.2C and 2% sounded really really great, I took it with a pinch of salt. Well I have to say, it’s delivered its promise, which was quite unexpected to be honest. I bought 2 because they were on sale, so I thought I could at least test out that promise. I left both thermostats in a closed room (with no draft) for overnight to allow them to sit. In the morning I took a picture of the reading (attached to this review) and I was shocked how accurate these lovely little things were! The SmartThings integration was a bit tricky as it wasn’t listed under the choosable options, I had to search for Sonoff and add them through that step. I also pushed and held the one and only button when it didn’t get discovered the first time, as I figured that was what had to be done to put it in discoverable mode. This wasn’t in the manual, which was very short and very small print, I couldn’t even read it. Though it was common sense to push and hold a button to make it discoverable, perhaps not everyone would automatically assume this step. Anyway, I highly recommend this product for its accuracy and for excellent SmartThings integration, as I can use it with any routines.

Battery life is dissapointing. Things can be improved by adjusting the trigger intervals.

Good device. Able to connect to echo show 8 and trigger automation based on temperature

I am a fan of Sonoff devices as they often can be used without a cloud connection and play nicely with Home Assistant and I have many of their product but this one is a miss. It is supported by both ZHA and Z2M but pairing frequently fails and the device drops off the mesh. I had two of these and both suffered the same and I tried it with multiple Zigbee coordinators at close range. The screen is poor and does not like being touched. Choosing to use CR2450 coin batteries is also poor; this is an unusual size from the old days of car key fobs and they are getting increasingly expensive. Using CR2450 over AAA or more common CR2032 or CR2025, which I have a stack of, is baffling. I tried updating firmware, wasting hours because they often failed due to poor connectivity, for no improvement. I finally gave up on these and sent them back and replaced them with a similar Govee Bluetooth product. I don't love Govee but at least they work. Sorry Sonoff but this is a bad product.

Sensor makkelijk te koppelen aan Homey. Doet wat hij moet doen.

Great Temperature /Humidity sensor. Good accuracy and integrates well into my Home Assistant automation through the zigbee integration.

Impeccable connecté en zigbee sur Home assistant.

Very nice

Descripción del producto para su venta dice: 2 paquetes y solo viene 1. Pero si es buen producto