Performance Tool W54205 Performance Tool Mini Grease Gun Kit with Grease Black

Great gun, well made, only negative is the line is kind of short. Recommend a longer line and adding a Lock N Lube coupler, but those are just preferences. Gun Works great as is. I put the locking coupler on all of my guns and a longer line just makes things a little easier.

Works as expected and fits your standard grease tube's. Only thing to really note is DON'T use it in tight spaces. The clip holds really well and doesn't want to release the grease fitting. I'm sure once it's used enough to wear down a little bit it would be perfect.

Sometimes I just throw away my money when I'm trying to be frugal(I saved 5.00!). This is one of those times. Tip had to be replaced before I could use it- wouldn't fit on any grease fittings! a few days later, grease was oozing out of both fittings on the top. The bleeder fitting can probably be fixed with sealing tape, but the bulk filler was oozing grease out of the ball. Not sure there's a fix for that... other than a pipe plug- remove it, and plug it. How many of us actually use it? But then, how many of us have the plug fitting lying around too. In short, count on rebuilding this while it's still clean, or have a messy piece of equipment in your toolbox.

Was hesitant to purchase based off negative reviews, but at thirteen sixty five dollars on 6-13-23 it was worth the gamble. This is the same gun they sell in some of the larger retail auto stores, but at a competitive price.I ran into most issues reviews mentioned. Leaking grease and dry pumps. The leaking grease from the areas circled in my pic was resolved by snugging them down with a slip joint plier (make sure not to cross thread). The coupler then has to be backed off to fit the zerk. This takes some trial and error, but once you hit the sweet spot, simply releasing at an angle will detach from the zerk successfully. Filling the joint/bearing etc is easiest done by keeping the coupler parallel with the fitting. Lower cost guns tend to ooze out if it's not set correctly. Make sure the head of the gun is on really tight to prevent leaking up top. I'd imagine plumber's tape could help threads that won't seal.After filling a couple ball joints, I ran into the dry pump issue after returning to fill some sway bar links. I re-bled the system and dry pumps continued. 20-30 pumps later I felt pressure build and it's been working since.I've been a DIYer for a long time and weigh cost vs quality vs application vs my time. Knowing that less expensive items generally have less quality control and cause more problem solving skills to get things working correctly if they don't work out of the gate or stop working altogether, an item like this that's used every few oil changes is worth my time because it taps into some critical thinking skills if things go wrong. I'm down for that exercise as it expands my ability to problem solve more complex issues down the road.Nonetheless, if use of a grease gun was necessary for my profession, this item would have never been considered. Good luck and keep on greasin'!

I got proper red wheel bearing grease with this product to fill the completely empty void inside the rubber boot and worked great highly recommended. I used this with a needle zeek fitting to insert the grease inside the boot.

The tip for this tool was too small to fit on the zerks to Greece ball joints and tie rods. That's my experience when purchasing this.

Good quality. Works fine for occasional greasing. Good size.

Injects grease better thany I’ve ever used and very reasonably priced

Exactly what I ordered

My 40 year old grease guns rubber deteriorated so the grease gun would not work anymore. Bought this one and it works great. Bonus is it is air powered, but you do need a compressor. You can use it with one hand. Very handy.

Funciona bien en las graseras de fácil acceso, con una sola mano

Very useful

I like the fact that it takes standard grease cartridges and has the option of a flexible nozzle.