Compustar 900R 1 Way 4 Button Replacement Remote Control Transmitter

Works perfectly. I used this to program mine: Toyota Compustar 900R Key Fob Reprogram Important Note: The engine will remain off for the entire process. Please keep your foot off of the brake pedal the entire time. Also, please make sure your doors are closed during this procedure. During this remote programming process, you will be cycling the key in the ignition (without cranking/starting the engine) multiple times in order to cycle between the ignition on and ignition off positions. The ignition ON position, will be the last ignition slot before the engine start cranking over. And then turn the key all the way back like you are taking the key in and out of the ignition; this will be your ignition OFF position. 1. Do Not start the engine. Cycle key from ignition OFF to ignition ON 5 times within 10 seconds. Key should be left in the ON position, should receive 1 parking light flash. 2. Tap LOCK on first remote, should receive 1 parking light flash; repeat step 2 for any additional remotes. 3. Wait 7 to 10 seconds for 2 parking light flashes to verify exiting programming. Once the programming is complete, please test your remotes by checking if you can lock/unlock. If the remotes do not sync with the system, please re-attempt the remote programming.

Work perfect to replace my broken remote. Was able to replace my broken 700R remote

Bought used so when it showed up, it did not work. I check the compustar website for trouble shooting and it said to replace battery. I ordered the CR2032 battery and installed it. I went to the car and did the programming procedure. Success!!! I was able to lock the doors, so I got out of the car and pressed the remote start button, it fired right up!!!

I bought a car with at came with one 700R remote and the unlock button didn’t work, the comparability was the same for both 900R and 700R in terms of controller and receivers, with a little help from a local shop, both work flawlessly

No problem I’ll buy again

Did exactly what I needed, stoked about how easy this was to program.

Exact replacement for broken remote. Works just like original.

No programming instructions were included! Here is what you need to know. The Compustar 1-Way 900R Remote will work as a substitute for the older discontinued 700R/600R remotes. To program: 1. Get all the remotes for this car together. 1. Turn your ignition key two positions. Then go back one position and forward one position 5 times within 10 seconds (you don't start the car, but keep your foot on the brakes in case). 2. You should end the 5th turn on the on position so the compustar computer has power. 3. Press the lock button on the new remote 4. Press the lock button on up to two more remotes (if you don’t they won’t work anymore). It took a few trials and errors and looking at youtube to document these steps in hopes this is useful to you.

It didn't work for my alarm system but it was just the wrong remote overall for my alarm system. The problem was when I tried to return it, it was really expensive because they are a 3rd party dealer. So I had to pay to return it

Not compatible with Ant-1wam. Even tho it says it's compatible on the description IT IS NOT. Do not buy otherwise the seller will not pay for the return shipping it will be out of your pocket.