FEITA Soldering Iron Tips T12 Electrical Solder Tip Kits for Micro Electric Soldering Station, Small Pencil Soldering Iron, Mini Solder Pen Accessory (T15-D08/D12/D16/D24/D4/D52, 6Pcs)

VERY NICE CAN'T WAIT TO USE THIS YEAH , YEAH

the insulation on some of the iron tips wasn't 'pruned' and one of the tips, had a pit on the bevel side. So these tips are pretty cheap. Get them if you want to roll the dice.

Good value. They work as well as the OEM tips.

Attached to my FX-951 station and it did not work. Came up with S-E error. Then I realized that you really have to force them in all the way to make contact, probably bc they are new.

Tinning the tips I couldn't get the extra solder to drip off. I usually shake the extra off into my tip tinner but these work almost as good as the hakkos tips do. The only problem was getting them to seat properly. Anyone with a hakko station needs make sure they are fully seated and they should work absolutely fine. I will be buying extras as the price is right.

Bought this set of T15 tips for a wand i bought at the same time and upon inserting the tip the first time it didn't feel right so i pulled it out and had two very long wires come out. The insides of the tip!!!! I didn't have the equipment to get the broken cap out of the locking pins but got lucky with a screwdriver and got it to a reachable point. Used a hakko t15 tip and wand thankfully works perfectly saving me more than 60 dollars i would have had to spend on another wand. These are complete garbage and should not be sold if it comes completely apart before being able to use. So unless you wish to possibly have to buy a new wand DO NOT PURCHASE in my honest opinion.

I like that they heat up fast and at a really good price

The first tips I got were a bust, they didn't work at all. However after returning them and getting a new set, they work great. They work well in my FM203 and heat and soldering just as nice as the actual hakko tips.The J02 is slightly larger then the actual hakko JS02.Will definitely order from this company again after dealing with their customer service.

Llego a tiempo si está bien apenas lo voy a usar

Minus one star for mechanical imperfections. While is negligible for the wide tips, the smaller ones are almost conical with some faint traces that they where intended for D shape. The one in the image is D 08 if you can trace the slopes, the pictures are made rotating the tip 90°.

I ordered these at the same time I ordered my Hakko fx-951, because the genuine tips that I wanted were out of stock and would need several extra days. Of course not being able to try out my expensive new iron for several extra days was out of the question, hence this order.They do look the part, but the tolerances seem to be slightly off. I struggled to get them into the ironing wand, and even when I did the most usual result was an "SoE" error on the Hakko 951 controller, which I now understand means "sensor error", i.e. the controller has a poor connection to the tip. In some cases I was able to get it working by removing the tip and trying again, maybe pushing it in harder this time, but it has never been reliable. I tried polishing off any potential burrs in the tip connection area, but I didn't see any improvment after this. I worried that excessive force might damage my iron.I don't regret the purchase, I was after all able to get some tips working sometimes, and it was a useful stopgap until the real things arrived. Btw, I tested the real tips when they arrived and they work perfectly, first time every time, so it wasn't that the iron was bad. I guess you get what you pay for.

Just recieved these but using them and changing out the tips was easy. The fine points and hook tips are small enough for any smd type soldering. Only time will tell how well they last I the solder station.

Fits the iron on my soldering station nicely. One of the three I have tried thus far faulted out after only a few hours in the iron, so I docked a star for that.