RENEGADE BLADE 2pk-8"-20t - Renegade HAWK/HYBRID - Brush Specialty Carbide Brush Cutter weed eater Blades, 203mm

These are decent blades and blow the standard sharpen style brush blades out of the water. In open terrain I think they would last a good while. I was using them in rocky conditions where it was almost certain to grind on rocks attempting to cut trees, using the stock brush blade would require sharpening after the same scenario. That said they cut like a hot knife when new quickly cutting through hedge (Osage orange), cedar, and locust (Up to 5in making a back cut). The blade still cuts decent even after 5 teeth have been damaged/chipped (one was chipped to begin with). Until the blade starts burning the stumps I'll keep using it.Ones of the blades (the one I referred to above) arrived with a chipped carbide tip. R&B Global was super responsive and shipped a replacement blade that arrived in a couple days later. I did not have to return the damaged blade so that is why I used it first.

Pros: Cuts really well and fast when all the carbide teeth are intact.Cons: After 30 minutes of cutting brush only (no contact with metal or rock), 4 of 20 carbide teeth had snapped off (see arrows in picture) and the blade cut much more poorly and slowly. Low durability makes these blades less cost-effective than non-carbide blades.

I have a Cub Cadet brush cutter from Tractor Supply and I had to take the guard off to make it fit to my liking. Once I got it on and started cutting with it I was very impressed. The motor that is turning it isn't very strong but with cut up to a 2" branch and bigger if you take your time. I just used it for cutting shooting lanes in the hunting club. Again, got to be careful when using or try to do what you can to make fit with the guard... Hope This Helped!!!

I purchased these to replace the stock blades on my Jonsered Brush Cutter. These blades are several steps above the stock item in their ability to cut brush. I did need to clean out and slightly shift, read bend, the brush cutter blade guard to get this to fit as it barely fits. They are definitely well worth it.

Can't believe how sharp this blade is. I've found quite a few uses for it already other than normal trimming.

Cuts willow trees like a hot knife thru butter, way less expensive than the similiar stihl blade that cost twice as much

Using this blade on an Echo SRM string trimmer designed to work with conversion to a blade. This blade does a great job of cutting and the carbide tips ensure longer useful life.

These blades do a very good job of clearing small diameter trees and under brush, and make clearing large areas a breeze. They start sharp and will stay that way if you avoid hard objects such as rocks. I would highly recommend these blades.

These blades really work on brush. Turned my weed whip into a beast. But be careful, they would do a number on your leg if you misstep.

Worked very well. Wore it down by hitting rocks which has no bearing on the performance of the blade.

This blade is absolutely awesome takes out anything Cut 2 to 4 inch trees and brush down!!!!

these blades are cut above the dull blades i was using.

Great Blades!! Been using this in the woods on ATV trails and they work great. A must and much better than blade at big box stores in my area.

Fantastic blade. Attached to Echo weed eater. Have cut down 5 in persimmons, I have gone thru several blades and this has been the best..

Lasted fairly well cutting cedar, lost carbide tips which started affecting cutting. Not bad blade for the price.