Professional High Covering Power Spray Paint, Gloss Black, 500 ml

Did just what was said on the tin (quite literally).

Can't say the product is bad but the delivery of this item was terrible and the can had sprayed itself and primer all dried around the nozzle. And all inside the packaging. Package was damaged by delivery driver.

Don’t waste your money on anything else! This gets the job done first time! Excellent product! Everything else on the market is inferior to this product! Thanks

Used to revamp plastic exterior trim.Takes a few passes to get the best finish but looks well once done.Only problem is it doesn't go very far, expect 3-4 passes and get 2x more tins then expected to cover the distance (in my case).12 month on it still looks good.

I’m a newcomer to anything auto let alone bodywork. Sanded back to metal a Mini R53 boot that was dented, highs & lows a mess. Planning to prime and send to paint, thought I’d try this out but had little faith in anything that rattles! Wiped with isopropyl/water and paper towel dried. 19degrees outside no wind, perfect conditions. First coat went on a dream and at the recommended distance had an amazing coverage! Left for 10/15mins second coat just flys on and builds amazingly. Third coat and I’m pretty much done! It’s a flat even cover and there’s loads left!!! Put on forth coat and I’m confident this base will prime and finish perfectly. Honestly probably one of the easiest parts of bodywork I’ve experienced. Ordered 2 x cans and have covered boot, hind qrts x 2 took down door edges and feathered to metal all having 4 x coats and I’ve still got loads left. For the price I’ll order another 2 x cans to guarantee the roof, bonnet, front wings and front panels easily. Cheers

Got a slight smell to it, fine for me to use outside, looks like it lays on and stays with no run off. I'm using it on alloy wheels, original paint. Coat painted area then cover with bin bag over night for best results. The only issue was the can lost pressure half way though the can. I started to dip the can in hot water for 5 minutes, (NOT RECOMMENDED) then the rest came out with a bit of adapting. Reason for a four star.

I used this to refer my alloy wheels.I initially didn't have much luck using other paint strippers to get off multiple layers of old paint.The alloys had been used as drift wheels prior to my purchase and previously referred by a third party. They just sprayed paint directly over the original alloy paint which left the dried paint that needed removing full of drips and wrinkles (somehow).I found the best way to use this product was to first rough up the surface of the paint with a wire brush or sandpaper to allow the best absorption into the paint itself. Then give it a good spray with this product and watch it bubble away. ABSOLUTELY DO THIS IN A WELL VENTILATED AREA & make sure you use suitable protective equipment - this stuff is highly corrosive.After not a very long wait at all the paint has started to turn into a soft gel like substance. A quick jet wash later and the vast majority of the paint was removed. This stuff worked far far better than any of the other paint removers I used, I wouldn't hesitate to use again.WORD OF WARNING.Do not jet wash near any other cars or any other paint and the bits of paint that flick off while doing this if left on the surface of other paint would strip that paint easily leaving spots and marks where the paint has eaten through the other surface. I noticed one piece land on and old body panel and left it a few minutes to see what happened. I was surprised that even after being washed off the alloy it had the ability to still keep going.Summary: Great product, very powerful.. use with care and read all instructions thoroughly.

A cheap , aesthetic and effective way to address several years of commercial wear and rear on a Navara pickup bed surround