Bumper Scrape Guard for Cars, 2 Pack Front Bumper Scrape Guard Anti-Scratch Universal Fit Black Car Bumper Protector Carbon Fiber Front Lip Splitter Scrape Guard Skid for Lower Sport Cars SUV

Whether you have a front splitter or just want to protect you front bumper this guards work tremendously. This kit comes with real 3m double sided tape! They’ll surely stay on and protect your vehicle if applied correctly as i’ve installed these in the past. Step 1: Throughly clean bottom of where you choose to apply with alcohol and a clean rag until it’s dirt free. Step 2: wait for alcohol to fully dry then apply Adhesion Promotor. This makes the surface sticky making it almost like if you’re sticking tape to tape (hard to seperate) Let this dry. Step 3: Remove 3m backing tape and use a heat gun, lighter, or hairdryer to heat up the double sided tape till it’s warm (this makes it extra sticky) Step 4: Line up product about 1/4 - 1/2 inches from the edge and slowly tac it down so it holds its curvature. TAKE YOUR TIME with this step because using this application method makes it grab on so we’ll to the point that if you try removing it, you’ll ruin the 3m tape making it unusable. Step 5: Go over and ensure that the strips are pressed firmly onto your application service. While this fully cures try to avoid contact for ~24-48 hours for the best result (P.S. If you read this far go ahead and trust me with this over the other brand since it’s less than 1/2 the cost and it’s the exact same material)

I cemented them to the bottom of my hollow after market spoiler to reinforce it.

Wow wow wow. I have bought these type of products before to protect my splitters. The first one I bought was from a big brand, and it worked fine. Another splitter I bought a generic one, and the quality of that one definitely was a couple notches down. The adhesive was not strong, and I had to apply separate adhesives to make it work. This product, oh man, definitely a different level. It comes with adhesion promoter, and the product is super slim and strong, made out of polyurethane. The double sided tape is 3M, and incredibly strong bond, which I found out first hand because I had to make minor adjustment and it was incredibly difficult to remove. Just super impressed with this and hugely recommended. Totally worth it.

Putting the bumper guard was pretty simple and the adhesive was strong. Day 2 after putting this on I heard a loud sound during parking of my car. When I looked under the front bumper, the scraper guard saved the day and there were no scratches on the car body. The adhesive was really good and nothing moved, Overall its a good product.

Adhesive doesn't hold as well as it should

I've had them for about two months now and the ones I had to bend to line up with the curve of the car have started to come off and will need to be replaced. They seem to be made well but the double sided sticky tape comes off the guard before it comes off the car.

These are amazing! Third car I’ve applied these too! They really save your bumper or splitter, considering mine is Carbon Fiber I don’t want it scratched at all! These work great, highly recommend. Adhesion is great too just make sure you clean the area with alcohol and then use the adhesion promoter provided.

Good quality item to prevent scraping under your front spoiler. The 4 protective strips come with the 3M tape applied. Also included in the box are instructions and a couple of packets of adhesion promoter to ensure that the strips will adhere to the surface. Depending on your application, you might need to purchase 2 kits.