Garage Epoxy Floor Kit – 100% Solids - 2 Part Industrial-Grade Coating UltraGlaze Topcoat | DIY Slip & Hot Tire Resistant | 300 Sq Ft - Designer Gray - 17 pc kit

Our garage remodel turned out great. The instruction are clear and direct removing any guesswork. The kit came with almost everything we needed.Square footage is true to size quoted. We heavily covered 800 sq ft with a 900 sq ft kit and had a small amount of product remaining. It went down easily, looks professionally done at a fraction of the cost. I’m satisfied and glad we went with this option

1 year update - This survived perfect over winter in a heated garage. The garage is set to 45, so it is on the cold side. There was absolutely no cracking or flaking. This has held up and still looks like new. One thing to be careful on: avoid putting tires on relatively fresh epoxy or it might stain.----original----I debated epoxying the ~40 year old garage for a long time. I was originally going to go with RustOleum, but I am incredibly happy I found this product. It includes nearly everything to complete the job like a pro. I used 3x 600sqft kits in an ~1400sq ft garage. The concrete was very old and worn, so I used more material than needed to help hide spalling/etc.Prep is the most important part. Sweep, hose out, de-grease, acid etch. After the acid etch you will need to extremely thoroughly wash the surface off - if you can't hose the area out, you will want to use a wet/dry vacuum and loads of water. Watch the manufacturers videos to better understand how to apply this. I highly recommend the squeegee to spread the product quickly and then go back and back-roll with the roller. Timing wise, I applied this when it was over 90 outside. I applied roughly 1 gallons at time leaving a 'wet edge'. Realistically, I had plenty of time once the product was down to walk on the surface and apply flakes. A tip for the flakes: practice on a tarp and throw the flakes into the air. Also don't ever grab a full handful.Because we needed the storage, this was applied to one half the garage and then the other. If you need to do the same, don't apply flakes to the edge, don't clear coat the edge, sand the edge prior to the next coat if more than a few days since it was applied.There is more than enough clear coat for multiple coats. If desired, you can pick up more anti-slip additive to add to it (which I did). Once applied, the floor feels like sandpaper. That makes me feel much better about applying this to stairs as well.Overall I am thrilled with the result. The end result look amazing and will hopefully last a long long time. I will update if I run into any problems.

I had a great experience with Amorpoxy. I had questions about my floor prep and response was fast and reassuring. The garage project turned out really nice. Instructions were easy and spot on. I would recommend this product for DIY projects.

Went down very well and looks great. I did a full grind on the floor and was a little nervous about the coverage of the product after reading in the instructions about a pre primer I might need to put down but it covered very well. Not sure what the squeegee is used for I used a roller for everything the squeegee just seems to wipe it off. I was a little nervous with the 20 minute working time stated in instructions so I did a 600 sq ft garage in 4 stages could have been two I had plenty of time.

First and foremost my product arrived damaged. AmorPoxy quickly got me out a new product and was able to answer my questions via customer support about using the optional “Primer” step as well as the crack filler. Unfortunately my garage floor already had a layer of ‘something’ from the previous owners so I had to rent a Floor Sander from Home Depot. (The main reason I opted to prime in the first place) Followed that up with the acid etch wash to maximize a clean surface and clear out the concrete dust, moisture test and crack filler, then two coats of primer, followed by the epoxy layer with chips and finally top coat with non slip powder added.Some take aways:My garage floor is roughly 422 square feet, two car garage. The 300 foot kit was PLENTY. had enough primer for a second coat and tons of epoxy and top coat left over.Throwing chips is easy to get out of hand, my floor isn’t perfect, some spots are heavier than others but that’s okay, try to even them out as best as you can.I used my food scale and a small mixing bucket for the epoxy ratios. It’s a 2:1 ratio, and with a quick bonding time they recommend doing small batches. I used Saran Wrap on my food scale and just measured 800 grams Part A to 400 grams Part B, it was perfect to knock out a good size portion of the edges on the floor, then dump out and roll. Easy working with wifeTake your time, while knocking this project out in three days seems optimal as advertised that just wasn’t for my life schedule. I was able to sand and acid etch one day, gave it three days to dry, primed, and primed again back to back days, but gave it another 4 days to dry. Then epoxy and chipped. Gave it two days to dry, and then top coat. Gave it two days to dry before walking and will probably give it another two days before equipment and even longer before cars go back in.Call me careful, but I was pretty positive and confident it would look amazing when I was done, and it does! Extremely pleased, but I want it to look amazing next year, and the year after that and so on. So take your time, don’t rush and read the instructions a million times, watch the YouTube video a million times.Overall very satisfied. I will try to update this review in a year 😅 and let you know how it looks.

Describes as Desert Tan. The color flakes are Red and Green NOT TAN. A 5 year old can tell the difference between red, green and tan.Not returnable. Vert Very disappointed.

Great product! The kit included everything needed, plus helpful videos and instructions. Installation was quicker and easier than expected, saving time and money. Perfect for your next DIY project!

Very easy to use kit! Instructions were easy to follow, application was simple.and finished product looked great.