Honeywell16.4ft Indoor LED Strip Light - Color Changing RGB, Motion Activated with Remote Control - for Bedroom, Kitchen, Dorm, Game Room, Cabinets, Etc - Wall Plug 12 Volt No Battery

Wish the sensor was a bit further away from the plug in I zip tied them under the bed frame they are nice next time might try to look for something with a sensor on both sides of bed . Put them in the gest house everyone loves them.

Installed in a large safe. The double-sided tape that comes attached needs careful attention. If you just pull off the backer, you can easily remove the entire strip of double-sided tape. It will leave a slight sticky residue and it’s easy to think that the tape sucks. In my case, I carefully removed the backing, the tape remained, and has worked just fine. The tape is adhering to the fabric material lining the safe and continues to hold well. There is no flickering of the LEDs at dimmer levels. The sensor is placed on the floor of the safe and actuates in full and low light with only the opening of the door.

Lights work well and the brightness/color is good. However the tape is a bit lacking with certain surfaces making installation slightly frustrating. The appearance is good and so far with some extra tacks they hold up on the ceiling well.

Easy ro install, simple to operate.

I ordered this set to use in a pantry that is pretty dark inside at night even with the kitchen lights on. We have an oulet in the pantry so I decided on these so that I didn't have to change batteries or take lights out to recharge them.I spent quite awhile planning on how and where I was going to put the lights and cleaning the areas where they were going to be stuck to. I got everything mounted,plugged them in, and was instantly disappointed.The white IS NOT white. It's more of a light teal blue color. All the other colors are ok. These are also NOT very bright. You would think that they would be because they are being plugged in BUT I have some battery(3AA) operated lights that are way brighter. And yes, I did use the remote and turned the dimmer all the way up.The motion sensor works as it should though. This is the only real positive thing that I can say about these. I am going to use them for now since I already have them installed but I will get a better set once these go out. I tried to take pictures of the supposed white light but my phones camera wouldn't pick it up very well. I would have to recommend saving your $15 and putting it towards a better set.

My daughter wanted lights for her bunk bed. She loves them and all the color functions.

easy to install but every time I change my tv, the lights are being controlled by my tv remote I also had to put tape on top of lights because they kept coming off the wall and I made sure to clean and dry my wall where I was hanging the strip. Sad to say but I am going to be returning this product and order the ones I had ordered previously for my TV.

Read some reviews and was starting to get concerned about the adhesive material and general quality. Here's what I found. Anytime you apply a sticker, you need to prep a surface. Apparently some people don't realize this. Take some alcohol wipes or windex and clean the surface you plan on applying these too and the stick just fine. Motion works great, all the lights work and are the colors they are supposed to be. Different timer settings can be adjusted to keep the lights on either 20 seconds, 60 seconds, on full-time or off. Bottom line, looks and works great!

Most of the cookie gives the same light. When I select blue colour it turns off.