9001 Can-Do Clamp Corner Clamp

These are great and heavy duty metal. They are much sturdier than the "plastic" items that are "spring loaded". You can even hold two pieces together than are different thicknesses. I had no problem with holding 2x6's together and they should be exceptional at building picture frames during their build. I bought two so I can hold both the tops and bottoms of larger panels together during assembly.

This was perfect for simple wood working jobs I do around the house. The clamp has 2 adjustable holes built for mounting to a work bench add a ton of durability and making it very sturdy. The vice is simple and with a little grease is smooth tighten and stay held for the duration of my job.

This thing seems super sturdy and it works fairly well. If you're going to use it for things like cabinets (big panels of plywood) i would suggest using two right angle clamps at a time, one at the top and bottom.It can be slightly annoying to use with the large handle. If it's sitting in the middle of a table, you can only do 180 degrees at time, then adjust the handle to do the next rotation. Place it on the edge of a table if possible, or make sure to get it pretty tight before installing so you only have to do a couple rotations to tighten. Some people might prefer the large handle because you can seriously tighten it down if you want, but for my purposes, a more ergonomic handle like they have on the horusdy 90 degree clamp works far better.Also, note that the tightening happens on the inside corner (the horusdy clamp tightens on the outside corner). I find I prefer working with an outside corner clamp for my purposes (cabinet building), but I think both are equally useful.

Held two pieces of 2 X 4s tight at a 90° angle. Will buy another. Very sturdy compared to a Kobalt 90° clamp.

Wish I had these years ago. It is funny how some things are used so often after you purchase them. These little clamps are well built for price you pay. If you want to do metal work, they might work for very light occasional use...but I would go with larger clamps.I needed a clamp to speed up my wood target making process. The first target took 5 times longer to build, but by the 10 target I was really moving. You need two clamps for the jobs I have used the clamps for. I image will end up purchasing 4 clamps to speed up the production process. The Clamps are easy to store, light, and well built. Great item.

The media could not be loaded. I purchased four of these Can-Do Clamps for assembling Bee Colony Boxes.The maximum thickness of pass-through stock on these is 1 and 3/4 inches.The maximum lay flat miter or T-Joint thickness is 2 and 3/4 inches.The Clamp body is nice and heavy, painted aluminum.The threads are of good quality and the clamp holds very firm with very good gripping of the stock.The corners are OPEN, so any glue can drip down the joint without messing up the clamp, you also have open access to the joints for screwing or drilling the corners without the clamp getting in the way.You can bench mount it, wall mount it, or use it to shim stock while locking down the 90 degree angle.I use two at a time, as shown in the video, and have them clamp opposite 90 degree angles, this makes all angles a true 90 degrees.They work exactly as I expected them to, I expect these clamps to last a VERY long time as there really just isn't anything to wear out. I recommend them without hesitation or reservation.When it comes to the inconvenience of the sliding T-handle for adjusting, I just get it well within a few centimeters of the stock I plan to clamp, then just put it on and finish tightening.

These clamps are amazing compared to the old corner clamps I had been using for years in my woodworking hobby. The old clamps were hard to align and I was never guaranteed a 90 degree fit. These clamps are not only great from an ease of use and accuracy perspective, but they will hold up versus the resin/plastic comparable products that I read everyone is breaking when they clamp them down. The price is definitely a little higher than what I wanted to spend per clamp (I bought 2). After using them I will now invest in more and hoping I will never have to buy another set. I did read the complains about the red paint transfer and while I did see some of that it was minimal, and I was able to sand it right off. I'm glad I bought these versus the plastic versions which are cheaper. The other nice thing about these is that you can join two different thicknesses with no issues. Overall I am very satisfied and definitely recommend these to anyone needing good corner clamps for woodworking.

This thing works really well to make a square corner but the red comes off and marks up the wood. Then you have a sand it off.