KUAFUFront & Rear Inner Fender Liners Compatible with Jeep Wrangler JK JKU 2WD/4WD 2007-2018, Steel Bolt-on Style Wheel Well Liners Splash Guards Yellow 6PCS

After adding bigger 295/70R17 tires on my Jeep Wrangler JKU Unlimited they were rubbing the big clunky factory fender flares and fender liners. I replaced them with flat steel fender flares and these flat black aluminum fender wells/liners. They look great, work great, and are a breeze to install. They are definitely an upgrade over the factory plastic and have a mesh section that allows heat cooling from the engine bay while idling and at highway speeds. The two tabs on the ends of each fender won’t have a hole on the body so you’ll either have to drill & rivet them on or personally I would recommend just running some self tapping screws on there like I did. Looks professional and went on in 10 seconds with an impact drill. Other two mounting bolt placements use the factory M6 thread bolts with 10mm head from factory fender liner hardware. Great product. Would buy again or recommend to others 10/10.

Would definitely recommend

Not the orange I wanted. This was like a school bus yellow. I had to paint it orange.

These inner fenders fit well and looks good but it has some downsides to it. The metal is very thin and the powder coat is thin as well so it scratches real easy. I had to cut out the part that goes around the sway bar links because the inner fenders were banging on the sway bar links. Then lastly the hex cut openings doesn't have a screen or anything behind it so some debris may go into the front of the engine bay. A cheap solution to upgrade from the factory plastic.

Doesn't line up and not properly made to fit. Wholesale don't line up and you will have to bend to fit. Rust easily. And is in the way of tie rods and other parts. Did more damage than good. Nice color though….. shame

I'm impressed with how easy these were to install compared to the more expensive competitors like artec. It's a single piece inner fender design and each is held in by two of the stock bolts and two rivets which I opted out of using. It's semi sturdy with out any but with its a solid unit! Instead of using rivets I just used two self tapper screws and I couldn't be happier

If your like me and sick of the prices of JEEP aftermarket. Buy these now before a Company buys them up, put their stamp on it and resell them at a marked up price. Made in China and sold at American prices.J - JustE - EmptyE - EveryP - Pocket

These fender liners are like the smittybilt liners but without the xrc logo and less expensive. They fit well and i used them with the stock cut fenders.