woodluvBedside Drawer with Shelf Cabinet Side Table Storage Unit

Looks nice, decent value but a but of a pain to put together. Took me about 90 minutes to assemble. The draw holder screws are too small, so I had to get longer ones as they kept popping out. I enjoyed putting it together

Bought this to use as a small table underneath our bedroom tv and does the job perfectly. Was pretty simple to install as I did myself, only part I couldn’t figure out was this plastic part for the drawer as all it did was scratch the inside of the top part of the drawer so was disappointed by that. The handle is white which doesn’t look the best in person as I think a a chrome style would look a lot better but the price of this makes up for it as have seen similar which cost a lot more so can’t really complain. Overall good product and does hold weight as I have a full size laptop and an Alexa speaker on it.

I ordered 2 of these on 5th June, 2017, and, after an initial glitch caused by the carrier, received them on 15th June. We chose these cupboards as they were slightly higher and had greater depth and width than other bedside cupboards, and we wanted the extra space. They arrived very well packed with all of the parts complete - they are self- assembly. You will need a PV/Philips/pozi-drive/cross-cut screwdriver, familiar to everyone who has ever bought any self-assembly units. The instructions are on a single sheet and comprise diagrams. I recommend carefully unpacking and laying out all the pieces to ensure that they are all there and that you can distinguish between them. All the wood (mdf) parts are labelled clearly, and the fixtures come in three small bags inside a small cardboard box. Open and lay out all the fixtures; each bag is identified with stickers indicating which parts are enclosed.The assembly procedure is: 1st - the drawer, this requires 8 screws plus an additional one for the little round handle. Again, I strongly recommend that you check you are using the correct screws each time as shown on the instruction diagrams. 2nd - the base comes as several parts, including the leg sections (parts A and B) which already each comprise two legs fixed together. You start by screwing the drawer runners onto each of the 2 leg sections and then put part B aside. On part A add the dowels as indicated and also the strange two-part fixings. The larger part goes into the receiving hole (the large holes) with the + side outwards. You'll see that it has an open section, this should face down the hole coming in at 90 degrees. This fitting will receive the pin of the other element of the fixing. You screw that other element into the part which is to be connected to the leg section. I know it sounds complicated, but once you have done one then it's easy. Make sure you study the diagram!By following the instructions you should have one leg section with the upper parts fixed to it (although one of them is quite loose, being held by dowels only) plus the bottom shelf. After fitting the necessary fixtures to leg section B you then add it to what you have already built and tighten everything up by screwing each of the large elements a short way clockwise. This locks it all together.Incidentally, the method of construction means that you can disassemble it quite easily. I assembled both cupboards and realised I had put in one piece back-to front and it was very easy just to loosen the fixtures and swap it round.The final piece is the top which, again, is attached using dowels and the two-part fixtures. There is also a small plastic fitting to attach to the front bar directly above the drawer which prevents the latter from being pulled right out, simple but effective. That's it, well pleased!As I mentioned at the beginning, these were shown as despatched on 5th June, but there was no updating of the tracking, which was unusual. So we contacted Elite Housewares via Amazon and they told us that the parcel had been damaged in transit and returned to them. They then arranged to have a replacement parcel sent by 24-hour delivery and by a different carrier. I noticed on the label it had been received by the carrier on the 14th for 24-hour delivery and sure enough it arrived this morning, 15th June. I thought this was worth mentioning as I believe Elite are based in Luton and we live in Belfast. Almost invariably we have to add an extra day to expected delivery dates to allow for the ferry or whatever, but not this time.Elite were helpful and kept me informed. I originally emailed them via Amazon when I didn't see any change in the tracking info by 10th June. One they got to the original delivery date they emailed to tell me of the returned parcel and that a new one would be on its way. They then emailed to say that it had been despatched. I would definitely recommend buying from them in the future given my experience with this order.

Really simple and easy to build really good quality very happy worth every penny and a lot cheaper than others I seen in shops that where exactly the same the sides come put together which is a bonus

Bought two for either side of the bed. Good size, handy drawer and enough room on top for a lamp, photos etc. Good sized shelf underneath for books etc. Easy to assemble and great value for money. Love them!

A little struggle for me to fix this up, nevertheless I managed to complete the task and took me some extra time. And the end result is great! Fit perfectly at the corner of the room.

The drawer unit looks good when finally assembled & is a sturdy piece of furniture - the instructions need to be improved with more details of which fixings should to be inserted first

Can’t complain for the price really but the drawers are a bit loose, they aren’t on runners so just slide in and out. They do the job!