NH-D9L, Quiet High-Performance Dual-Tower CPU Cooler

I replaced the OEM fan and heatsink on my old i5-2500 CPU as I was getting concerned about the 70+C temperatures I was seeing when playing games or transcoding video in Handbrake (which runs all four cores at 100%) with the Noctua NH-9DL cooler. As my inexpensive tower case does not have access to the underside of the motherboard I had to remove it completely in order to fit the bottom plate that the cooler uses for support. Of course, if I had been doing a new build or had a modern processor with an LGA 2011 socket I wouldn't have had to do this. Noctua provide absolutely everything you need in the well thought out packaging, including clear instruction leaflets for each processor type, together with high-quality thermal paste and all the tools, parts and cables you need to finish the job. If you take it slowly and follow the instructions carefully it's hard to get it wrong. The cooler is designed to fit in 3U cases and works very nicely in mine. It doesn't overlap the memory slots, so there's no problem with my tallish RAM sticks. But how well does it work? The answer is that it fits my needs perfectly. At CPU idle the fan spins at just over 800 RPM (I'm not using the silencer adapter cable) and at full stretch the speed rises to around 1200 RPM. This is with my BIOS set to Silent mode. At all speeds it's very quiet - in fact I'm unable to hear it. My CPU never gets any hotter than the mid-50s even when doing a big transcode taking over half an hour. In summary, this is an excellent CPU cooler for the smaller case. If you're an overclocker you might want to consider a bigger cooler or even a water-based solution but for occasional heavy use at stock speeds this works just fine.

I purchased this cooler as it has a fairly low profile and I intend to change my PC case to a HTPC case fairly soon. It should fit inside a 150mm height case (I hope). I've previously had issues with the temperature on my PCs AMD FX-8530 cpu with it ranging between high 58c -75c using an old Arctic Cooling Freezer Pro 7. I had read that these CPUs do run hot so I was more than a little surprised by the improvement. It now runs at around 25c to 35c even when gaming. This cooler does have an option to have 2 fans (the 2nd purchased separately) which I chose to do due to the previous problems I've had. Also, on my PC this cooler is orientated so that it sits directly inline and butted up to the case rear discharge fan. This may be helping to lower the temperature further. The orientation of previous cooler may have been circulating the heated air back around the case before being picked up by the case discharge fan. I am happy with the sound level. The whole pc is at about 45db measured off an iphone app and the other case fans seem to be the main cause of that. Installation required removing the standard AMD bracket that came with the motherboard and fitting a bracket specific to this cooler but this wasn't much of a chore and seems more secure than the original. It comes with a tube of thermal paste. Probably enough to refit it 3 or 4 times. Excellent value for money. I'm very happy with my choice.

Used on a new systems after being unable to find a suitable cooler in my local stores, was a bit of a faff fitting it, but my system is running as expected and i have no issues with heat under load (ai generation and some graphics). Having not used this brand before, I am pleased with the build quality and have had no issues with the cooler since fitting

I had originally bought this in 2016 to cool my 6700K processor and it did a great job. I later upgraded my CPU and switched to an AiO cooler to have a less obstructed look in my case. I'm currently using this on my Core i7 9700K which is an 8-core CPU that tends to run hot. I am using a Corsair Carbide Air 240 case whose design limits the height of what CPU cooler can be used. My previous AiO liquid cooler had a 240mm radiator, but I found its dual fans annoyingly noisy under load, and it wasn't doing such a great job keeping temperatures in check either, my CPU was sometimes exceeding 90C on prolonged AVX workloads (like when encoding video or rendering a complex scene in Blender) and throttling itself. I sent that unit back for a refund and I switched back to this Noctua air cooler and there was a big improvement. Be sure to clean heatsink and CPU thoroughly and apply thermal paste properly when re-using any CPU cooler. With this NH-D9L, I have stress tested for hours using Prime95, OCCT, Blender and games (mainly Doom 2016 and Doom Eternal) and there was never any thermal throttling, CPU core temps never went over 80C even under AVX2 workloads which draw extra current and produce extra heat, this being the worst-case workload. I'm not overclocking manually, but the processor happily boosts itself to 4600-4900 MHz automatically depending on whether it's running a single or multithreaded workload. Overall, very happy with this little guy. Highly recommended if space is a premium in your computer's chassis. It doesn't have gee whizz RGB bling, but that's a positive thing in my book, as I can't stand PCs lit up like a pinball machine. If you do have a roomier case than mine, be sure to check out other Noctua offerings as they make even beefier models more suitable for overclocking.

Great cooler, quiet when used with the reducer. Quality product in quality packaging. Install could of been easier, the problem with one bracket with three different positions is when the bracket hole doesnt perfectly match the expected positions .... I had to take off CPU and restart 3 times to get it to fit properly. This is why not 5 star.

Ever so good, works like a dream

I had problems cooling my Intel i7-14700K CPU and getting a suitable fan to fit inside my medium sized case. The Noctua NH-D9L proved to be an ideal solution. It seems exceeding well made, easy to fit (although I had an old case so I had to enlarge the cutout behind the CPU to fit the mounting plate), very quiet, and is able to easily control the CPU temperature between 30-40 deg C in normal use. Considering the problems i had with other fans I think it is good value for money.

First bonus is that it's small! Really small! Which would be bad if it was not designed to fit in small form factor cases. It has the same motherboard footprint as the stock coolers by Intel and amd. It is taller so you must double check the maximum HEIGHT you can have in your case. I have a thermaltake core v1 and this is perfect. I'm running an i7 4790k which is a HOT chip due to it being so powerful. Setting this up alongside a PUSH front case fan, Cooler configured to PULL and rear case fans set to PULL I am getting 10 degrees under the stock levels. I am confident I could push the cpu to 4.5ghz maybe even 4.6ghz and still be in SAFE ranges. Secondly you get Noctuas thermal paste which is beast! Thirdly it is SO easy to fit. You get the parts to fit to AMD and Intel chips and a handy tool to fit it. Literally the hardest part was getting the motherboard back in which is really the case and mobos fault! You can a nice case badge so you can show of your high spec rig to all your mates when they come round ;). If you like me need a good cooler in a small space and don't have room for an all in one watercooler don't cheap out and cheat yourself of the performance and hardware life you COULD have and give noctua a try!

JUNSBO N3ケースにてXeon E-2124Gを使っています。24時間稼働。 当初は手裏剣参を使おうとしましたが、PCケースの後ろに15mm厚の8cmファンが取り付けられない（正確には取り付けられるが手裏剣参が8cmファンのブレードにわずかに触れる）ため、こちらに交換。 ケース背面に8cmファン2つを付けても問題ない状態になりました。 室温26度でアイドル時のCPU温度が43度となっています。

This little cooler works well even for a 5950x/7950x. Installation is a breeze and fits nicely for any AM4/AM5 motherboard. Keeps the CPU cool however you might not be able to sustain top clocks for long periods of time with high activity compared to bigger coolers. For better cooling attach a 2nd fan.

Doesn't actually fit LGA1700 despite what the product details page says.

Product as described, Fast and accurate delivery

o cooler trabalha extremamente silencioso, até parece não funcionar. Mantém o processador resfriado mesmo quando exigido alta performance.