Secure Your Adventure! 🚀
The Pro Armor A114220 Black 4-Point Harness features 2-inch padded shoulder straps and a secure latch style lap belt with a quick-release buckle, ensuring safety and comfort for your off-road adventures. Compatible with a variety of UTVs and ATVs, this harness is designed for easy installation and adjustable fit, making it a must-have for any outdoor enthusiast.
Manufacturer | Pro Armor |
Brand | Pro Armor |
Model | A114220 |
Item Weight | 6 pounds |
Product Dimensions | 6 x 4 x 12 inches |
Item model number | A114220 |
Is Discontinued By Manufacturer | Yes |
Exterior | Black |
Manufacturer Part Number | A114220 |
OEM Part Number | A114220 |
Position | Front |
T**O
2021 maverick x3 ds turbo r
All in all the harness is great. 5 stars. Everything worked as it should. Looks awesome in my 2021 maverick x3 ds turbo r. The only downside is, (this is probably just on my vehicle) the lower mounting plates had to be drilled out to retain the factory hardware. You could probably just bolt these down, but my model vehicle has sleeves on the lower mounting hardware so the the lap belt can pivot for different size people. I chose to keep the setup and had to drill the mounting plates another 1/4 inch bigger. This was somewhat of a chore because I'm sure the plates are made of hardened steel. But the finished product was worth it. I don't recommend trying this without a vice or drill press. Like I said, tough stuff... There is no hardware that comes with it, but I'm sure every model vehicle is going to be different. I used grade 8 bolts for the upper and retained the lower seatbelt mounting bolts for the lower. The little light works too. Just have to add 3 triple a batteries. One light wouldn't stay on, you had to hold the lense down, so I just twisted it a little bit. Now it stays on when you push it. Other than drilling out the holes more, the project would've taken about 10 minutes to install both sides. After installing I trail tested and approve. Comfortable and do not loosen while riding.
M**O
Very impressed
Well, made great quality. The pictures on Amazon doesn’t do it them justice. Would buy them again.
A**R
Perfect fit 2023 polaris rzr xp1000
Excellent product, comfy to use, easy to use.You will need to buy hardware for them. Simple with a handful of bolts washers, lock washers and nuts.
R**V
Snug tight
I loved it use it on my razor 2019
R**S
Initial impressions are pretty good...let's see how well it holds up.
Harness has very good build quality. The webbing is tight and the sewn seams are strong. Good padding on shoulders, buckle locks into place well (time will tell how well it holds up) It does not come with any mounting h/w but I you should be able to to reuse the h/w from the old belts. If this doesn't work for some reason, then you would need to pick up h/w from a local h/w store. The adjustment and fit appear pretty good but as mentioned, these are not installed yet so check back for update after I get them installed.The light is cheap but seems to work fine. However, I expect to use the pocket for other stuff. The phone pouch will not work for larger phones like the iPhone 6S Plus or larger 5" screen size phones if you have a case on them. Without a case you "might" be able to squeeze it in but it will be a tight fit. It would likely work well for iPods or other music players.The padding on the shoulders is thick and should do a good job. The 2" width seems plenty for the occasional track run or general recreational off road excursion. I am installing this on a Yamaha YXZ1000r SxS and expect it to work well. You could easily add a sub belt if you wanted without issue. On the YXZ, there is a harness bar for the shoulder straps, it is a tad high and will work OK but adding a lower harness bar would provide for a better fit.As mentioned, I will update this review after I get it fully installed in the YXZ.Overall, it seems like a pretty good harness.Update:Completed the install over the weekend. Installed them on my Yamaha YXZ 1000r SS SE. Installation was easy and straightforward. The lapbelt harness attach points did not bolt directly into the frame at first. I had to modify the frame brackets a little to get them to fit. Not horrible but I would say this was an issue on the Yamaha side not accounting for aftermarket harness installs as I think most harness' have similar setups.It takes a little bit to get the harness' to line up right when attaching to the harness bar. Too short a lead and the padding sits too far up on the shoulders. Too long a lead and they sit too far down on your chest but this is going to be true of every harness so not a Pro Armor issue.Harness are holding strong once mounted so they should work well for securing both driver and passenger.You can find the unboxing and install video on my YouTube channel. JayTaylorOnYouTube
R**N
Nice quality.
I've never used a 4 and 5 point hardest before. This is one of very good quality. I have no doubt that it'll hold me inside the Rzr.I bought this after reading on Rzr forums about the necessity of such harness. Not taking from the quality and usefulness of the harness, I'm regretting my decision. First, 3 inch is a very wide harness. I'm larger than the average guy, and feel that 3 inches seem very wide and bulky. I also bought the 2 inch harness for the passengers, and in retrospect I would have chose 2 inches all around. But then again, I've not been or seen or talked to some one who's had a major crash so I can't say if the wider harness is safer or less painful.But the main reason I regretted putting these on, and again it's my fault and my decision, is that it's a bit of a pain to use. I'm like most new Rzr owners who was excited about a new toy and basically upgraded everything. I would say that unless you do some major hardcore stuff, I would not recommend these belts. They are bulky, they don't retract, and they are much more of a chore to put on. Most of the time, actually all of the time up to now, I just drive my wife and kids around. They don't use the belt because it's too much of a pain to use. They simply are not practical for the casual user.
R**A
Gran calidad
Fácil de instalar y gran calidad de producto
M**
Fast shipping
Exactly as described. Would buy again from the seller, for sure.
D**T
2021 Polaris general XP
Great quality, I bought these for my general as I wanted my passenger to feel more secure than the 3 point seatbelts. I mounted mine on the back square bar of the roll cage as the general seats don't have holes in it. Defiantly remember to buy one seat belt by pass plug. But all my passengers have loved these as they are super easy to use and adjust.
L**.
safety first
great product,nice adjustible,fits for my petite wife,and my fat self
D**E
Comfortable
Perfect for rzr. Easy install. Very comfortable. Feel much more secure than original belts. Would recommend.
E**.
Excelente calidad/precio
Quedó Perfecto en mi polaris rzr pero si tuve que comprar algunos accesorios de fijación (tornillos, tuercas, rondanas) todo quedó a la perfección. Son muy cómodos y lucen muy bien por su color. Se lavaron fácilmente después de su primera ruta
A**R
Great for the price
Great for the price good quality
Trustpilot
1 month ago
1 month ago