MECCANIXITY Copper Heatsink Coated Graphene 70x20x1.5mm with Thermal Pad and Rubber Ring for M.2 SSD PC, Laptop Cooler 1 Set

Applied this MECCANIXITY Copper Heatsink Coated With Graphene onto a Hynix P41 2TB into a Acer Predator Helios 300 (PH315-51) and the results are outstanding the drive now idles in the 80F range and during heavy gaming never peaks over 120F so the combination of the heatsink and my laptop cooler (Llano v13) keeps the heat dissipation at acceptable levels which for tight spaces inside a laptop is a huge victory. Now I have a laptop that never experiences throttling due to heat buildup and I was able to drop my undervolting down to a minimal level without frame loss. Gaming is a joy with MECCANIXITY Graphene coated heatsink.. I RECOMMEND IT, HIGHLY!!

Installed this on my m.2 in my laptop and it definitely has lowered the temperature by 5-7 degrees Celsius. If you need a heatsink to fit a laptop I recommend giving this a shot. Only thing I wonder is how long the bands will last.

I ordered the 6mm one for my HP laptop, and after installing it, it lowered the temp in my laptop by 15°C. I used 4 bands to hold it to my name drive. However there are no instructions. That's the reason I only give it 4 stars. I Broke 1 band while trying to install it because one edge was sharp.

Use this for my secondary NVME that's tucked underneath my GPU. Needed the low clearance. Keeps it cooler than my main one.

I have this installed in my AYA NEO. I probably could have increased by another .5mm.I haven’t noticed any heat build up on my device since the installation.

I have used this heatsink to cool my WD_BLACK 4TB SN850X NVMe.Temperatures after a day was 44ºC which is pretty cool compared to usual temperatures of 57-58ºC.Six days of continuous use later the temperatures settled at 48ºC. This is an outstanding result.I will be replacing the heat sinks of other NVMe with this one.Highly recomended!

Recently added this to my rpi5 nvme build using Geekworm's P579 & X1001 combo, and I'm glad to report that there was plenty of clearance at the top which was my main concern considering the small form-factor of the case. The securing rubber rings seem to me more like silicon or nylon, but they stretched fine to snug the drive and stay in place ensuring good conductivity. I used 3 of the 5 included. Installing the pad I recommend laying it on the short side first, then slowly lowering it as it sags to ensure no air is trapped; took me a few tries. Don't forget to remove the plastic from both sides of the pad. Overall, I'm very happy with the quality of this heatsink. See pictures.

i got this and its little heavy. I own C&C . So i took some off the bottom. For me it better being lighter. Less to cool down faster. It works. THKS