Secret Weapon Drones V2 Top Plate for the Heli-Nation Edition SW-5 CF X Frame The SW Series is a lightweight mono X frame design. Its smart design uses innovative accessory plates that allow for multiple configurations. Heli-Nation Edition SW-5 Support for 5 inch props Weight is under *103g with included hardware -Carbon fiber plates alone is 87g 4mm Bottom Plate Special Edition HN top plate with red color standoffs and silver top screws The accessory spine allows the mounting of accessories like receivers and video transmitters with easy access to the buttons, LED’s or dip switches. Its camera side plates were designed to house an HS1177 style cased camera and has a three hole design to allow the user to position the camera for more protection, lense clearance, or desired tilt amount. The maximum camera tilt supported is 80 degrees. It also has a detachable antenna plate that can be flipped, allowing the option to run the xt60 plug or sma connector on either side of the quad. There are many strategically placed cutouts in the frame to allow for easy component mounting and wiring to be tied down. The top plate has horizontal cutouts near the front to allow the user to run HD camera straps through the top plate. Additionally there is an optional brace plate included for the front of the frame that reinforces the area and offers additional strength in crashes. The frame has well placed battery strap cutouts in the center and back of the top plate to support double battery strap use. Additionally, the bottom plate also has battery strap holes to support bottom mounting of the battery. This allows the use of larger batteries along with an HD camera. The motor hole cutouts support standard 22xx (M3 19x16mm) hole spacing, but also supports smaller motors 18xx (M2 16x12mm) hole spacing without the need to angle the motors wires diagonally off the arm.
Trustpilot
1 day ago
1 month ago
