AKWOX (4-Pack) Tempered Glass Top LCD Screen Protector + HD Clear Crystal Buttom LCD Screen Protective Filter compatible with for New Nintendo 2DS XL [2 GLASS Top, 2 PET Bottom]

The protectors came in a little cushioned book looking thing, with two plastic sheets on both protectors to prevent them from sticking to the inside of their foam pouches. There were also two wet screen cleaning wipes and two dry screen cleaning wipes, so that the buyer could clean off the screen. I was gonna use the blue thing to remove the dust, but when I put just a little bit on the screen, it was extremely latched on, so I had to remove it over the course of about a minute, so the dust remover could be less sticky. The application was easy, and the air bubbles can be simply removed with any small, flat edged object. Like a dish scraper square for instance.The top protector is pretty thick, I doubt anything will be scratching the top screen any time this decade. There aren’t any smudges , cracks, bends, nothing. All good. The bottom protector is thinner, but it has to be so that the stylus can still be used, and despite that, it’s still decently thick. Like the top protector, no smudges, cracks, or bends. They both felt high quality when holding them, and they’re sticky enough to where they won’t come off unless you actually want them off.Good product 👍

First off, I want to state my one issue with this.The wet wipes they include are fine. It's the dry wipes that I have a problem with. They left streaks and I had to get a microfiber cloth to properly wipe away the left over solution and dust.Please be aware that. If you have a microfiber cloth or glasses wipe that works well, use that if you can.Overall the installation was easy. I messed up installing the bottom one so I already used both protectors. (Dust)The top one was real easy and I had no issues.Both cover almost 100%, and what isn't covered can't be touched because of the plastic lip of the system.The top protector adds enough thickness that the circle pad leaves an imprint. However that is on the left of the top screen, and does not cause an issue for me. If it bothers you, it's real easy to simply wipe it away with your finger.I gave it five stars as even though there is that small issue with the dry wipe, this is inexpensive and if you routinely get screen protectors for your devices, (or have glasses) you likely already have a microfiber cloth.

I've been needing a protector and I'm happy on first attempt it was easy. I used a card. I have no air bubbles and its not noticeable. It fits pretty good. Top sceen protector is little bit smaller than actual screen like by a centimeter and I think its on purpose since i had one like it for my phone. No big deal. Bottom screen fits perfectly, I had bad luck with bottom screen having air bubbles 2 times on other ds handhelds before.

First off, let me say that I have put these on two 2DS and 1 2DS XL and I have to say that overall they are a great screen protector. The tempered glass for the top screen looks and feels great and indeed covers the entire screen with very little if any gaps on the edges. This is a big pet peeve of mine because the larger the gaps the more opportunity for dust and crud to settle in and make the whole thing just look messy. There isn't a lot of clearance for that to happen here.The touch screen protector is, for obvious reason, much thinner and NOT tempered glass. Again this is to be expected because you need the touch response here. The touch pads on both consoles remained responsive and worked well even with the protector.The 4 stars is because of the installation "instructions" and provided elements. The protectors themselves have really handy stickers to help you know which side is which and to help pull off the masking, which is really simple. I think the instructions, however, are a little over simplified. If I had not put on a dozen screen protectors over the years I might not have been as clear as to what to do. Also, you might as well throw the provided "cleaning" cloths in the garbage. There are two of them. #1 is suppose to be the wet, alcohol based wipe. In two of the three I have done from Akwox this one was actually bone dry. The 2DS XL one was indeed wet, so I went ahead and used it. This was a mistake. Whatever cleanser that is on the pad just made the screen streaky and covered in residue, even after I thoroughly wiped it down with the second, "dry" cloth. Do yourself a favor and skip these. Just grab an alcohol prep pad (like the ones found in first aid kits - they sell them by the box at CVS or Walgreens for cheap) and a lint free something (I use coffee filters).A few tips: Wipe down the screens with the alcohol pad then follow it up with a wipe down from the coffee filter. Clean as a whistle. Also have a can of compressed air handy and work in a bathroom with the shower running hot to create some moisture in the air. This wont be enough moisture to harm your electronics but it will cause all of those pesky dust particles in the air to settle out and help to cut down on any of them landing on your nice clean screen. Lastly, make sure to take it one screen at a time from beginning to end. Don't try to do them at the same time as you will only cause one to get particles on it while you are doing the other.Again, I would recommend this product, just know what you are getting into when it comes to installation and you will be very happy with the results.

Easy to install. I got these for my 2DSxl and they are great. Soft film for the touch screen and hard for the top. 2DS works just fine. I have a lot of experience installing screen protectors so it was no problem for me. I see some people complain about how it doesn’t fit all snug on the corners, but there’s a reason for that. You’re going to need to take it off one day whether that be replacing or if the old one gets too old, and you need a space to get to the corner of the screen protector. These are supposed to last long but not guaranteed to last a lifetime, although they might if you take care of them.

Honestly fits perfect, quality is great. No complaints.

Great fit. Had trouble removing bubbles on top screen. Prob more my fault than the protector. Good product.

Top screen protector was easy to put on, had a little trouble with the bottom (that's on me) works like it should and was packaged very well.