All Windows PreCut Tint Kit

2017 Ford F-150 Supercrew with a three piece back window. I ordered 5% on all windows. The entire process of this product was excellent from ordering to eventually rolling down my windows to admire my work. The tint came precut, as stated, in a shipping tube. The package was undamaged and the tint was flawless with the exception of the outer edges of the excess that was going to be thrown away. I think this was an excellent idea to leave the excess on to protect the usable cut outs. The tint went on the windows without any issue at all, fit was perfect, and it looks fantastic. Now, this isn't high dollar tint so I am curious to see if it holds its color. If I get 6 months or a year out of this, I will be perfectly happy. At under $35 for a $250 tint job (I got quotes before ordering), I don't mind at all redoing it. I highly recommend this product to anyone considering having their windows tinted.Now, on to some tips...Make sure you have a clean flat surface big enough to lay your tint out on; like a kitchen table.When removing the cut outs, remove the excess around the cutout and don't try to remove the clear backing as well. You'll end up tearing the cut outs. This, to me, is more of a scored tint and not so much "precut".Get a cheap spray bottle from Lowe's or Walmart and a travel size bottle of baby shampoo. Baby shampoo is the key. Most other shampoos or soaps have detergents in them that will actually make it difficult to move the tint when you're trying to put in place.Clean your windows with a razor blade scraper and be careful on factory tinted windows as you could remove the coating. Just keep the razor blade flat and you'll be fine. Do NOT use a Razor blade to clean rear windows with the defroster lines or antenna lines. You will cut those little lines and the defroster or antenna will become useless. Instead, use a very mild scouring pad like the one on the back side of a sponge used for kitchen cleaning.I hope this review helps and you are as satisfied as I am with the way it turns out.***UPDATE*** 1/8/2020This tint is still in pristine condition. No fading and has not turned purple. Still looks as good as the day I installed it.***2nd UPDARE*** 2/6/2020I recently bought a 2017 F250 and ordered this tint again. And, again, the tint was cut to perfection, the packaging was perfect, and the company was amazing to deal with. I ruined one of the pieces and contacted them for a replacement. They resolved my stupidity by sending me the piece I needed at a discounted rate. I will always buy my tint from them. HUGE THANKS TO THESE GUYS.

Awesome, awesome film. Keep in mind, this film does take some skill to install, as is the case with any film. This was my first time doing a full car, and the first time using a film that isn't from a box store. HUGE difference in quality, which made for a quality install! My girlfriends car was tinted by a shop, and I am more happy with my install than I am with the job and film that was installed on her car. I plan on adding tint services to my auto detailing business, and will not hesitate to use Lexen films. They also sent me an extra window to use to practice, which was helpful in learning to shrink. Shipping was way quicker than I expected and I look forward to doing more business with this company. I did 5% all around and plan on ordering a roll of 15 or 20% to do the windshield as well.

While the product is listed as "Pre-Cut Complete" I was surprised to find the tint for the rear window was NOT cut for the 3rd brake light. After watching the seller's videos, I started with the smaller/simpler pieces first and those installed okay except for the right rear passenger window which must have been cut short on the production jig because it left a small gap at the bottom. Before starting on the rear window, I watched the seller's installation videos multiple times on shaping the tint with a heat gun to the contour of the back window...I won't list all of the steps because those are shown on the installation video. So after contouring the back window tint, I began the installation of the tint on the inside of the window. That was when it became apparent that there was no pre-cut for the 3rd brake light. I tried multiple times to get the tint up with the intention of cutting out the area for the 3rd brake light, but tint is NOT forgiving and it only takes one mistake to ruin the whole thing. The tint would simply not stay in position without having the necessary cut out for the 3rd brake light. The end result was just terrible. My car is a 2001 Honda CRV. The tint appears to be cut to the shape of the rear window and even had the cut-out for the rear wiper motor housing, so I'm surprised it's missing the necessary cut for the 3rd brake light because the 3rd brake light has been a requirement for passenger motor vehicles since 1996. While I would accept tint that only needs a minor trim, I ordered "Pre-Cut" because I want to avoid all the cutting. I submitted a request to LEXEN requesting replacement by selecting the "Return or replace items" function through Amazon, but have only received a notice from Amazon that it may take the seller a few days to respond. It's been over two weeks now with no response from the seller so it appears I won't be getting a replacement - at this point, I'd accept a refund. In retrospect, I should have probably put the $40 ($30 for the tint & $10 for equipment) towards a professional tint installer which around my town is $300+.

For the most part everything was nice and cut to shape, other than they were a little oversized, mostly in the length, but that can be cut to size. I wish it didn't have all the extra film that was the "waist" film that you have to cut off yourself. Also it would be nice if each piece was labeled for what window, it was a pain to keep looking through the roll for the correct window film, and figure out and keep track of which one is which. But it was awesome they gave me an extra driver's door film for practice, also I think I got a extra 1 or 2 for a couple other windows as well. But overall, great product and would definitely recommend and also buy from again.I would have given a 5 star rating if not for what I explained ^ in my review.