Upgraded 12 FT 0-30 PSI High Pressure Adjustable Propane Regulator with Gauge 0~60PSI Gas Flow Indicator, QCC1 x 3/8" Female Flare Fitting with 3/8 Flare x 1/8 MNPT, Stainless Braided Propane Hose

This product solved my desire to extend my propane heater and provide a regulated line. It has everything you need and is very sturdy with a steel jacket. The regulator works well and the RED knob assures compliance for LP use.I have purchased a second unit.

Bought for my daughter to run a glass sculpturing torch. Usually run a much bigger regulator. She wanted to run a portable operation for remote demos. Surprised that it even runs my Bethlehem water cooled bench burner. Over 110 jets need a lot of gas. If it will adjust enough to run my Bethlehem and Carlisle torches it will do most anything. We generally run the torch propane pressure at 7-8 psi for our glass torches and it doesn't frost up the valve at the tank. I doubt it would have the capacity and flow rate to run a glory hole for glass work though. Very confidence building appearance with the stainless braided hose. Bought 12' long to keep LPG bottle a long distance from the flames. I can honestly say I believe you will be impressed. I sure am.

Everything works great and as it should. The 3/8-1/8 adapter was useless though. I wish they would swap it for a 3/8-3-8 but it does as advertised

I was having issues with a portable heater. It puts out 125,000 btu. The regulator would shut the fuel flow off during use. I assumed that the 20 psi regulator was shutting off the high gas flow. I bought this regulator and I no longer have the problem. The ideal flame occurs at 25 psi and never shuts the gas flow off.

The product looks and feels amazing. I’m having some trouble with the high PSI output to a 200K btu stove, keeps tripping the safety which requires work to restart. I think the trick is to slowly turn on the gas with the secondary nozzle slightly open and increase PSI at the tank until hearing gas from the burner, then light (watch your eyebrows) and POOF. Day one, worked well, day 2 couldn’t get to work at all, day 3 tried the above and it worked. Crossing fingers day 4 will work the same way.

This is advertised as a high pressure 0-30 psig regulator. It is not. The best i could get was 18 psig before the cutoff switch tripped. 2 lost days of forging, 1 lost customer who didnt get his knife on time. I thought the first regulator was faulty so i ordered a replacement, it didnt work either. Im very unsatisfied. It would not get anywhere near the advertised psi no matter what i did.

. great quality_Fast shipping-my reordered one works Perfect-I ordered wrong one First time

The hose and couplings are top notch but the regulator is way too sensitive to adjust. The slightest touch and you add five pounds. Most heaters and griddles run on two pounds. It’s almost impossible to get just two pounds of pressure from this outfit