QUTAWAY Jump Starter Cable Booster Clamp Cable Replacement Alligator Clamp Booster Battery Clips EC5 Connector with 8 AWG Wire

Burned up another set of cables for my jump starter so I purchased these. I liked that they did not have the box on them like many others, but also means it doesn't have the same reverse connection or other safety features. However on my set, the negative and positive were reversed from the red and black cables so thats important to check. These are also pretty flimsy with pretty much all plastic clamps, the clamp pivot was really flimsy.

Easily connects & disconnectsMuch better than the stock version

I bought this cable to replace 2 Anker cables (1 led/1 digital read out) that failed in the past. This cable worked right out of the box and helped to start my vehicle up on the first try. I have used it 3 times since that with no issues. I highly recommend it as a replacement or spare cable. Since there is no control module, it provides instant power.

These are good little clamps...seem to be pretty good quality. When I bought a jump starter it's clamps had a goofy little relay attached to them that would only allow power to the clamps for like 10 seconds. You have to be more careful with these clamps (for example don't connect them reverse polarity) but the advantage is that they supply constant power and eliminating the relay means less voltage drop in the circuit. I pulled 300 amps through these clamps and the wires barely got warm. They also have another nice feature. If you look at some cheap jumper clamps you'll see that the main wire is only connected to one jaw so power only goes through one side. These clamps have a connection between both jaws which gives more surface area for current to flow through. Overall I like them.

the set that came with my jump pack had a circuit board piece inside a rectangular plastic box soldered inline on the Red wire, and it had some fried bubbly components in there after the first use.thought the jump pack was junk but decided to try replacing the cables - and it worked! i was able to jumpstart my motorcycle months ago and more recently my 4.0L suv.Good buy!

I was looking for a replacement jump starter cable (8 AWG) to have as an available spare in case the original failed when needed. Just about all other replacements are 10 AWG, but this item seemed to be what I was looking for...and at a reasonable price. Plus, it has a generous cable length. A pre-purchase question sent to support was answered quickly, giving me the assurance that, in fact, 8 AWG cables was what the product had.Caution: Before purchasing any replacement cable, make sure that the cable connector is compatible with your jump starter. There are several types of connections in use by manufacturers.

These clamps feature secure clamping force, generous lead length, good quality materials and a jumper to insure current flow to both jaws. I am buying another set to upgrade the clamps that came on the so far excellent CTEK 4-206 battery charger I purchased through Amazon. If you are inclined to do something similar, you will need 5mm EC5 bullet terminals. I choose those sold by uxcell on Amazon, ASIN #B07KP99B2T.

So the original clamps that came with my lith jump-pack have the box on them and you have to push a tiny little button in in order to get full power to start your vehicle also because of that box once you attempt to start a vehicle if it does not start right away then you have to unhook the cables and reset the box to try again... Big hassle and I just wanted some live clamps that I could use responsibly and not worry about those "safety features" making it difficult to use! Unfortunately the set I received have the polarity backwards so the red is a ground and the black is positive 🤷‍♂️🤦‍♂️