Great Stuff PRO Dispensing Gun Cleaner, 12oz

Works great to clean uncured foam from the gun , It screws onto the applicator gun and flushes it out It also has a spray nozzle so that you can clean the outside of the gun etc.you don’t need to use the cleaner every time you replace the foam but you should never leave the gun without a pressurised foam can attached unless you have cleaned it thoroughlyI commonly leave the foam connected to my gun for weeks at a time without useing the cleaner I generally flush the gun With cleaner about every 3 or 4 foam cans unless I notice a change in the performance of the gunThere is enough cleaner To totally flush the gun about 3 times IT ONLY WORKS ON THE FOAM BEFORE IT HARDENSIT WILL NOT CLEAN A GUN IF THE FOAM HAS HARDENED. (Buy a new gun)THIS IS POTENT STUFF I RECOMMEND USEING IT OUTSIDEIT DRIES YOUR HANDS OUT REALLY BADLY

I tried using this to clean the gun the first time I used it. I screwed the can of cleaner onto the gun and it leaked. I used it to clean the gun, then when I removed it from the gun I saw the reason for the leak: The tip broke off the can of cleaner.The whole idea was that this makes the can multi-use, but the cleaner can ends up being one time use!So I thought it was a fluke and bought a 2nd can of cleaner from HD. When I used it, the exact same thing happened! I even made sure I didn't screw it onto the gun too tightly.I guess it's back to the one time use cans of foam.

This cleaner is a pressurized can of acetone solvent. It is indespensable for cleaning your foam gun. It also comes with a standard spray nozzel so you can spray the acetone on uncurred foam that may end up on the outside of the gun.Acetone will not disolve the cured foam so your only chance to clean a gun after you are finished dispensing foam is to flush it out with this cleaner.

This is Acetone, which is cheap. But, it comes in a spray can and attaches right to the gun, and has a regular nozzle so you can spray to clean up the foam mess that occurs when you change cans. I think they overcharge hugely, but it is needful, so I'll deal with it and continue buying unless someone else comes out with this packaged cheaper. It's not proprietary, so that may indeed happen.

I have been using this system for some time and have discovered some money saving tips for other users. The partially used foam cans can be reused if the valve on the cans are completely cleaned with the carbon tet gun cleaner and I mean perfectly cleaned. I also ran into an issue where the gun flush would not flow through the gun after several uses over an extended period of time. I solved this problem by replacing the tiny "O" ring on the flush can valve with a new similar "O" ring. This solves the problem because the "O" ring becomes smaller in diameter due to its compression when screwed into the gun thus not depressing the can valve. I hope this helps others same money who have had similar problems with this system. All in all this is a great foam gun system and is much cheaper than the waste that comes from using the Great stuff in retail cans.

I can’t even use this on my gun because when I tried to screw it on the black part popped off. Upon further inspection I see that I was sent a warped/broken can. So now, I not only have an usable can but also an unusable BRAND NEW Great Stuff Pro 14 gun. This was the first time I used it! I purchased everything at the same time so that I would have a working gun.This is my 3rd foam gun and I definitely know how to use it and how to keep it clean for future use. I put the other used can back onto the gun but because I wasn’t able to use the cleaner everything got all gummy and dried up. Tried to salvage it but it is too late. I provided a photo to show how clean and new my gun is. I tried to enter in for a refund or trade-in but Amazon isn’t allowing this option. I am very upset.

Good product for cleaning a foam gun. I would add that I find it best to shoot a little solvent out of the gun, then wait a few minutes for the solvent to break down remaining foam in the gun, then give one more squirt to flush remaining material. Used this way, I am able to clean my gun 4-5 times on a single can.

I replaced flooring using Advantech and research led me to Advantech recommending this type of adhesive to glue their boards, I was like okay and didn't think anything of it. well I had to back and do some trimming and changes and hollow cow the boards were glued so well I had to use a multitool to remove the part of the boards that were glued. Excellent product. No possibility of squeaky floors.

way overpriced.

Fast and easy to clean your foam gun. I will buy again