🪚 Cut the clutter, not the quality!
The Table Saw Dust Collector Bag is a high-quality, lightweight solution designed to fit 10" table saws with 2.5" dust ports. It effectively collects up to 75% of sawdust, ensuring a cleaner workspace. Easy to attach and detach, this durable cloth bag is compatible with major brands like Bosch, Dewalt, and Makita, making it an essential tool for any professional woodworker.
| Manufacturer | YXD |
| Part Number | Table Saw Dust Collector Bag |
| Item Weight | 3.52 ounces |
| Product Dimensions | 11.81 x 1.97 x 1.97 inches |
| Item model number | Table Saw Dust Collector Bag |
| Material | Cloth |
| Blade Length | 10 Inches |
| Special Features | Dimensions: L 31" x W 13.7" head side x W 9.8" end side, D of ring 2.5" up to 2 7/8";, Dust Collector Bag with Wire Support Frame., Replaces Bosch part TS1004; Easy to attach and detach to your tablesaw;, Helps keep work area cleaner; Collects up to 75% of dust and particles;, Can be used with other table saws that have 2-1/2 inch dust ports on the exterior of the saw; |
| Batteries Included? | No |
| Batteries Required? | No |
J**Z
So simple and works amazingly
What's not to like, cut saw dust down by 90%!
D**.
Quality
Bags are well made. It was somewhat difficult to put it on my table saw... but it was probable the location under the table that made one think twice.
O**N
Good for the price but not great
The is a functional dust collecting bag that fit my 10" Ryobi table saw, the zipper is a nice feature that works. My table saw dust port has a 2.5" ID and 2.75" OD dimensions. This dust collecting bag fit easily over the OD(Outside Dimension) and I could have made this open more wide if needed.Down sides:These are very inexpensive so as expected the material used is very thin and will probably need to be replaced in a few years.After installing on my table saw and did the first cut - about 25% of the dust was coming out right my the table saw ejection port - the cause was that the material has an opening by the inlet to allow for the installation of the bag. To fix this I used some duct tape that I will have to cut when I remove the bag, then reapply to put the bag back on. Since this has a zipper on what is the bottom end, dumping that bag is easy and the bag does not need to be removed.Also this material does have a risk of catching fire if you are cutting something that is heating up, be careful. The material is not fireproof. This should not be an issue if you are using a newer blade on the table saw and using the correct blade for the material you are cutting.I will be buying another one of these so I have a spare around and because the price is so reasonable.All in all this was a good purchase for collecting dust on the 10" table saw.
M**.
You get what you pay for
This bag works good it catches probably 80% of the dust that goes to it, however the fabric is then and the spring clamp tore the fabric the first time I used this. If this were thicker material near the neck where it attaches this probably would not be an issue but it’s cheap enough to replace every few months as needed
A**A
The seam at the top was rooming and sawdust escaped.
My husband thinks this product is a bit better than good. It catches most of the sawdust, but not all. I had to complete the stitching at the top of the dust bag where it attaches to the saw. There was about an inch and a half through which the sawdust escaped.
J**B
the top seam is garbage
Not sure how the reviews are not worse, everyone complains about the same thing, the top seem rips out and then the dust collection doesn't work correctly. You can fix it yourself with a few stiches, but why dont they just build it right to begin with.
S**N
Works as a cheap dust collector
If you don’t have a shop vac then this is a cheap solution. Cut the dust down to almost nothing.
G**K
Leaks
The bag leaks quite a bit of dust at the top where it attaches. I will have to close the opening slit manually to stop leakage.
Trustpilot
1 month ago
2 weeks ago