DHP Durable Metal Silver Futon Couch Bed Frame

The price was right. And although there are a few bad reviews, there are a lot of good ones. I also saw this frame recommended on another site that was reviewing futon frames, "The Sleep Judge." It was #5, but number 1 was too expensive, number 2 was another DHP frame that wouldn't work for me, number 3 and number 4 were twin size chairs and expensive, and then there was this one. So when i saw it went on sale, i got it. I'm glad I did. It's working out well.It took a while to put together, but i would not say it was difficult. There were a lot of screws. Just stay organized about it. (I used my own hex tool which made it a bit easier) There was one part where the picture didn't match very well to the product, and I ended up having to redo something, but it didn't take long. Just pay really close attention to the drawings.Because this futon frame is lightweight, I would not suggest it for anyone who might be giving it a lot of punishment. I would also suggest, contrary to what the top reviewer says, do not use a power screwdriver unless you are very careful. I had no problem using a regular screwdriver to install all the screws. They do say that when the futon is pulled out in bed mode not to sit or lie on the very edge. I would say that would be more of a problem for a heavier person, but it's an issue of balance. Since they don't know the weight of the person purchasing it, they make the warning. (again, this is a lightweight frame.)If you have a thick futon mattress with coils/foam that doesn't fold easily, then there is a learning curve to getting this to go back into the couch position. At first i thought I would never be able to do it. (I still would have been better off than the old frame I had). But after some experimenting and practice, I can get it folded every day in a matter of seconds and I'm a 5 foot 4 inch woman. You need to stand on the side of the futon where the arm rest is. Grab the top of the "backrest" part of the mattress and push it forward like your pushing the mattress into a folded position, then grab the seat part of the frame and pull up toward the "backrest" part of the mattress. If this doesn't pop the frame into couch position, then let go of the mattress and grab the "backrest" part of the frame and pull it toward the "seat" part of the frame so the seat and backrest of the frame are forming a "V", then rock the whole thing forward (toward the seat side) and it should fall into position. It works for me every day.

So far so good! I had to find a YouTube video for a couple parts of the install, but it’s sturdy and nice!

Good frame for the price. The front mattress holders are flimsy. One broke off and one bent. We had to make our own version to make sure our mattress didn’t slide off. We don’t use the futon much so I would get a sturdier frame if it’s for every day use

Alright so, we went into this pretty optimistic. the box itself was packaged I’d say very well. organized, labeled, wrapped with plastic and spaced out with cardboard piece’s. decently heavy box, should have two people to carry it upstairs unless you wanna throw your back out. Now to the building process; the directions were a little hard to read but that’s how almost all these build it yourself amazon products are. The hardware pieces were organized perfectly in a way i haven’t seen before. They aren’t just thrown mixed together in a box, but individually spaced in plastic on a single cardboard piece for easy finding of each screw. MAKE SURE TO TAKE YOUR TIME ON EACH STEP. trust me, you don’t wanna tighten 4 screws in a cramped spot and have to restart. One complaint is some of the metal poles you need to screw pieces together into are too small. Directions say not to use a power drill, but using on a very low torque should be fine, and will save a lot of headache trying to hand screw metal on metal (if that makes sense). after 3 hours, we finally got it completed! Luckily we received an used mattress from some family and it fit perfectly on the frame. i find it easy to fold from couch, to bed, as they include handles that can be screwed on. it feels sturdy to sit on and has some decent space for at least three people and it still doesn’t feel cramped. I personally like how the back piece is a bit higher, so it doesn’t feel all small and like a child’s seat to sit on despite being lower to the floor than a couch or sofa would be. Overall, i don’t find it cheaply made like some people have said, you get what you pay for. Don’t buy a $70 frame and expect it to hold over 3000 pounds, it’s perfect for a hang room or bedroom for a group of teens or young adults like myself.edit: dropped some stars because the metal on the seating part broke and now you can fall through if you sit in a certain spot. not to mention to can feel the metal bars that are super uncomfortable to sit on. honestly not worth it.Edit 2: all the bars are completely breaking and popping off now, very disappointing