Trim-Lok Rubber Edge Trim 25 Feet X2008-25 1

Exactement ce que je cherchais pour mes fender flare oem de 2002 gmc sierra. Sa fait tellememt beau dessus et franchement plus beau que d'autre produit qu'on peut mettre. Caoutchouc très souple car mes fender flares font un angle de 90° et le caoutchouc suit l'angle sans problème. Merci beaucoup Amazon

Used to cover cut edges of molded plastic insert on motor home. Wanted something to "finish" the cut edges that would turn sharp corners at odd angles. This worked perfectly. Seems to grip firmly, if it comes loose over time I may use silicone or adhesive to keep in place. Seems good at this point.

This rubber molding is refined in appearance and exactly what we needed for our application. The polycarbonate in our application is 1/16" thick. This molding will grip onto an edge that is not subject to being struck where the open edges of molding are on the surface of the material it is pushed onto. In our application, the open edge of the molding was being struck from time to time pushing it off the material it was pushed onto. We addressed this by bending 10 mm wide 3M 300LSE two sided tape (purchased off Amazon) around the edge of the polycarbonate. We then peeled off the backing and pushed the rubber molding onto the edge. The rubber molding is now on the edge of the polycarbonate FOREVER!!!

Suited my purpose

I put over sharp edges of very thin 1/4 inch wire mesh called hardware cloth; it fits snug and secure.