CondorElite MA31-498 Single P90 & Ump 45 Mag Pouch Coyote Brown

I just received my condor pouch today. I purchased it hoping that my Silky Gomboy would fit. And it does surprisingly well. I added a plastic liner (from a milk jug) since the silky saw has some somewhat sharp edges. I am really going to like this. And it should fit many other items as well, saws, knives, tools. If you have an item with a sharp edge just fabricate a simple liner for added protection.

This mag pouch has gotten a few bad reviews, and some confusing good ones, because it does not arrive adjusted to handle the P90 magazine well. The closure flap is adjustable (this is not immediately apparent) and it is set too short.As supplied, when the P90 magazine is being pulled out of the pouch, the base / end-plate of the magazine gets caught on the bottom of the closure flap, an inch or so down in the pouch. And, the flap itself makes only a slight overlap with the front Velcro to hold it shut.To fix both of these problems, release the back of the flap from its Velcro by pushing a flat wide object - such as a putty knife (dull one), or two butter knives, or a metal ruler - down the back of the pouch behind the back of the cover flap / closure flap. Once the Velcro is loose (it will likely still be catching a little at the edges), pull the flap up until its lower end is out past the opening of the pouch about a quarter inch or a bit more.Now, the magazine end plate will not catch on the lower end of the cover flap down in the pouch, and the cover flap will extend over to contact plenty of the front Velcro to keep it closed and secure.Given its Velcro closure, and the awkward handling of the P90 magazine (particularly with the P50), you will not get lightning reloads, but with 50 rounds (you do live in a free state I hope), you should be able to stage your magazine swaps tactically, and this pouch will keep the magazine protected and at hand until that time.

This pouch fits the bill really well. The construction and materials used are pretty good and the design is decent. I am not a fan of the double attached PALS strips on the back, though admittedly I have not used an attachment system like this. (I have to admit that another 3 digit tactical gear company has me spoiled in that regard!) It does the job however attaching solidly to MOLLE webbing and holding strong.Lets talk about the actual magazine pouch now. This is what I would definitely call a universal SMG magazine pouch. Pistol caliber magazines that are on the thinner side such as the MP5 and Glock 33 round magazines will easily fit in this pouch. For those with a Sig MPX or a CZ Scorpion Evo, you should know how hard it is to find pouches due to the thickness of those magazines being greater than the previously mentioned models. Luckily this pouch is designed to fit thicker magazines so I can confirm that they will fit! They do sit a little low in the pouch for my liking (can fix that wil a piece of solid foam in the bottom of the pouch) but to have a premade pouch that fits the mags is an awesome thing. Especially since Sig has discontinued their MPX MOLLE pouches. Now they will fit a pit tight because of the adjustable velcro closure flap, but they will fit...About the closure, Again I am spoiled by more pricey product makers but since they don't make a pouch that fit the thicker mags, I went with this one. I prefer the bungee retention over the velcro flap, especially with a universal velcro flap that adds bulk to the pouch area. An "easy" fix for this is to first remove the universal flap closure all together. Then sew just the strip of material that holds that flap to the back of the pouch vertically in the middle. Sew a small loop of material on the front of the pouch and you have 2 attachment points to add your own bungee.All in all, this is as I initially called it a "universal SMG magazine pouch so it will fit most if not all SMG style magazines. The fit just wont be perfect for all magazines. And making a few alterations yourself will potentially save you major money as opposed to buying a custom tailored pouch. All in all I would definitely recommend this product.

Bahco folding saw width is a tight fit in the central elasticated strap while pouch length is plenty

Fits my folding laplander saw perfect.

nutze die Tasche für meine Gardena P200 Klappsäge. Nähte und Verarbeitung insgesamt machen einen sehr guten Eindruck. Viele Befestigungsmöglichkeiten. Der "Deckel" der Tasche ist innen nicht vernäht, sondern mit Klett versehen. Somit konnte ich diesen lösen und die Länge genau auf meine Säge einstellen.

I bought this pouch for the Bahco Laplander saw because i did not want to spend $70-$100 for a sheath and it fits PERFECTLY but on the belt it keeps moving forward and i find your constantly adjusting the sheath which is annoying,i well be looking for a leather sheath with a tighter belt loop.

Alles perfekt