5/8” OD Tubing Bender Roller Type Pipe Bender 180° HVAC Copper Aluminum Tube Bending Tool for Air Conditioning Refrigeration Repair

I purchased the Antstone 1/2" tubing bender to help with installing an aftercooler on my Quincy air compressor, and for possible future projects. The tool did an excellent job bending some 1/2" O.D. x .032" wall copper tubing. This is the flexible type of tubing, NOT the rigid type purchased in straight lengths. I was impressed with the quality of the tool, and its performance. The angle markings are clear and accurate. You should bend just slightly past the angle you need, to allow for the small amount of spring-back of the metal. Also, I recommend a slow, steady movement of the handle, to allow the metal to be displaced without tearing or crushing. My only small complaint would be that the handles could be longer, to give more leverage while bending. If you have weak arms, you might also want to order a set of dumbbells with the bender, to bulk up a bit ahead of time :-)

I have an older air compressor that wasn’t building pressure fast enough. Pulled it apart to find that the copper line from the piston to the tank was split. Said copper line was a discontinued item from the manufacturer. This bender allowed me to bend at tight detailed angles to recreate the tubing and was able to get my compressor back to running.

It worked exactly as it was supposed to. The plastic wheels were fine. The tool was sturdy. It did the job and is ready to do more.

Well, I tried to bend a lineset by hand. That was an instant disaster. I did some quick research on bending tools and decided to try this out. It worked perfectly for my use case. Made easy bend without kinking the copper. Saved my install.

It worked well for me, no kinks on full 90 degree bends that I made. I needed something that I could make accurate clean bends for a mini split I was installing.I would recommend.

not a 60 dollar value tool , bends ok , not sure of life of rollers ,no scale on handle makes multi-bend a effort for tight work (panel ) . where bend distance counts not your tool

The rollers are a GREAT idea. Unfortunately the rollers are two different sizes, and I don't understand why. The first roller to contact the tubing is the correct size, and would seem to make a perfect bend. Unfortunately, the roller that does the actual bending is purposely undersized and therefore flattens the outer bend of the tubing. I tried to swap the rollers, but the larger one won't fit in place of the smaller one. Again, good idea, but lousy execution.

worked very nicely, decent quality, no instructions though which they could improve upon. the rollers make nice clean bend.