1-inch Furniture casters Set of 5，Replacement cart Plastic casters, Black Nylon Plastic Small Swivel casters with Screws, Used for workbenches and Moving Drawer Cabinet Table

Worked as expected, and it comes with a spare!

I needed to replace the casters for a tower computer. These faster fit perfectly. They work good and am happy with the result.

Not given in the product information is the OVERALL height of these casters,which come in at 41mm, or 1-5/8 inches.If you're looking for very low-height swivel casters, these are certainly ones to consider.They're just like the casters found on most desk chairs: dual independently-rotating wheels,mounted to a stem, which is the swivel. Wheel construction is plastic, probably ABS.A steel stem connects the twin rollers on the axle.Plate and swivel stem is made of steel. Package is a ZipLok bag containing 5 castersand screws.Overall height is 41mm or 1-5/8 inch; wheel swing is approximately 1/2-inch outsidethe mounting plate's edge. These are simply much smaller than desk-chair andoffice-machine cart casters.Perfect for me.They will be used for an under-desk printer caddy so I can get my large pro-level printer(Canon PRO-100) under the desk, and just roll it out when needed.I very specifically wanted casters at 2-inches or less in height for this project,and these fit the bill very nicely. The entire caddy with printer and paper/supplieswill come in at under 60lbs altogether, so I don't expect around 15lbs per casterload to be a troublesome issue.Many others claim to be "low-profile" casters, but my Googling turned up various castersmeasuring in at well over 3-inches in height and going up from there.At under 2-inches in height, these casters are the ones for me.

Easy to install and great replacement for my beauty salon cart wheels.

I loved the packaging and the information provided by Amazon renewed. Truely customer obssessed service.Product worked perfectly. I have a piecee of mind, know it was tested befere delivered to me and there is a guarantee.. Awesome work!

One broke already but the other four are holding up. I don't expect them to last very long but they're doing an okay job right now.

This product is a virtual direct replacement for the casters for the LG portable air-conditioner LP0813WNR (and presumably similar models), provided you're willing to do a little work. It's worth it, because you get five Copapa casters for just over $8, while the real replacements from LG and other suppliers are about $20 ... EACH!You have two choices when you use these Copapa replacements:1. Break off the busted caster from its shaft. Take one of the Copapa casters and, using a wide-bladed screwdriver, gently pry the plastic mounting away from its shaft. (Once you've got it slightly off, you can use your hands to twist the plastic mounting backwards and forwards on the shaft until it slides off.) Now simply push the Copapa plastic caster onto the old shaft. You can then mount the caster on your LG device. You'll find it's the same height as the other casters.Or:2. Drill holes in the baseplate of the Copapa shelf. The holes you drill should be immediately adjacent to the existing holes - not overlapping the existing holes - and should be the same size as the existing holes. Now you can mount the entire Copapa assembly into the existing screwholes on the bottom of the LG device.I don't know yet how durable the Copapa casters are ... but I've got four additional ones in the pack, so I don't suppose it much matters.

I bought an LG air conditioner, one of those stand-up models with a hose for the window. While moving it to my pickup I was rolling it over rough ground and broke off one of the 4 wheels. These wheels were almost an exact replacement for the original wheels. The mounting plate is not quite as thick but seems adequate to the job. Shipping was next day. I recommend these wheels as replacements for most rolling air conditioners.

These wheels are what I exactly wanted for my base of my Tulsi plant stand. 4 wheels at 4 corners and 1 at the center, to bear weight of my plant which is mainly in the middle. Planter, stand and the plant weighs around 50 pounds. After installation very smooth maneuvering of the base, as I have to rotate the planter every day around its axis. This is because all sides of the plant gets to face the window and sunlight evenly, apart from the T5 lights above it. Wheels are working very smoothly. Excellent product.

Bon rapport qualité prix. Dimensions conformesnau descriptif.

I bought these for my husband’s home office chair. He is not overweight. Within three weeks they had started to crack, and now only three of the five are intact.

good

je suis satisfait, je fabriqué plateau roullent pour mes PC