HumanCentric VESA Mount Adapter for Acer Monitors, Does not fit R240HY bidx | Fits XG270HU, G247HYU, G277HU, R240HY Abmidx, Works with 75x75 and 100x100mm Patterns, Hardware Included

Bought this for my Acer XG270HU 27 inch monitor. When I bought the monitor, it was the only 144Hz one that fitted by budget, but with a downside that it didn't have a VESA mount. I didn't like the other outer-bracket type generic VESA converters out there. Came across this, and it looked like a tailor-made solution for the XG270HU. I was skeptical but decided to give it a try.It was not the easiest to install, mainly due to how hard it was to remove the stock stand from the monitor (that was not an issue with this product, but the how the monitor was constructed in general). I would suggest you get someone's help installing this, and it's a bit wobbly until you tighten the stabilizer. But after you tighten everything down, its very stable. I've mounted this on a North Bayou F80 arm, and after the initial adjustments I'm happy with how stable it is. The top stabilizer - although it only touches the monitor partially - helps a lot to almost remove any wobbling.Fair warning when installing (This is not an issue with this product), I managed to slice my finger while trying to remove the stock mount from the XG270HU. So, be careful there.

I purchased this for an Acer XG270HU and it works great. Definitely not wobbly on my stand, but it may differ from others depending on how the mounts are setup. There is a long screw that keeps the mount secured to the monitor, and I found that it was sturdy enough along with the VESA mount that came with my stand. The only problem would be the pricing, but there are no companies doing it for these monitors, so the cost is understandable.

Works pretty well for an aftermarket adapter. A little bit more screen wobble than I'd like, but the blame is more on Acer for not including a regular VESA mount, and not the fault of the adapter itself. Would have liked it if the adapter did not push the screen away from the VESA mount, but I'd rather have the sturdiness of the bracing rather than a compact adapter that may break (and potentially take my monitor with it).Overall, it's a pretty solid product. The welding is decent, though not amazing by any stretch, and everything lines up nicely.

These adapters were recommended to me for my monitors. They worked great, and were easy to install, but the instructions felt a little lacking. The biggest issue I had was there's 1 long screw that appears to be used to help control the flexing of the adapter, but installing it wasn't in the instructions, and I missed it until the first time I mounted my monitor and it flexed forward farther than it does w/ the screw installed, and felt really loose. Once I installed the screw, it's much sturdier.Overall I like the adapter, and it works great for mounting your monitors to a VESA mount. Would recommend!

(Updated to 5 stars) I am glad that I came back to this page and check other people's review after using this daily without the back screw for 2.5 years.. then I found I missed it, I may just throw it away. It is a customized screw. Contacted the customer support and quickly get replacement delivery. After installing the back screw, this VESA adapter supports by XG270HU quite stable in correct angle.---------------------------------(Old review without the back screw)I have to say they got the idea to design this and the base can exactly fit in my XG270HU. 4 stars for they really save me money to get a new monitor just for mounting. And the while stuff has a great sturdiness.BUT,BUT, BUT. the stableizer only help to prevent the monitor leaning back, but totally not helpful to stop the mounted monitor leaning forward, which is the usually case when you mount your monitor and want it to be in the height of your eyes. Who will install the monitor and lower head to watch it because the monitor is only stable when leaning backward.As a result, the monitor is easily shacking if you touch it or even push your desk.When I move one year after this purchase, I stared at the flat back of my monitor and found the solution! Since there is no hooking point on the back to let you tie or attached anything on it, the video output ports are the only choice. Luckily, DVI Port has two screws and this insure its stability. Shown in the picture, I plugged in the DVI Port and fasten the monitor to my mount rack. Now the whole structure are much more stable and the monitor won't shack when I move.Of course, I am using Display/HDMI port to output A/V

One of the screws to attach to the my vesa mount didn't fit in properly on my Acer XG270HU monitor. Also afer getting everything hooked up my Acer monitor sits up higher than my MSI monitor, just something to think about if you don't have an individual height adjustable dual monitor stand. One last thing to mention is that the instructions didn't show where i needed to put one of the screws, but I figured it out on my own. Still with all that being said it's nice having something like this available to even be able to put on a vesa mount.

The engineers who designed this did a good job of overcoming the inherent weakness in the OEM Acer mount which was seemingly never intended to do anything but support weight straight down. The instructions I received did not mention the long screw that reinforces the based of the mount, but this component is critical top a secure installation. Without that screw, the mount flopped around and felt pretty insecure. However, once installed, I feel reasonably comfortable the mount is more than adequate to function as a normal Vesa mount.Note that both the lower screw needs to be permanently installed and the upper rubber circular brace screw should both be installed before mounting. There's not enough clearance to install the upper screw and the lower bracket flexes just enough to make it extremely difficult to install the lower screw.

Fits works, a little wobbly. Overall good product.

Nach langer Suche bin ich hier bei Amazon endlich auf einen Adapter für meinen Acer XG270HU gestoßen, den man auch bezahlen kann. Er ist robust und kompatibel mit meiner Monitorhalterung. Besonders gut gefällt mir, dass der Adapter nicht unterhalb des Monitors herausragt, sodass er trotz seine großen Abmessungen nicht zu sehen ist. Klare Weiterempfehlung

Works like a charm, and easy to setup

I am split between if I should put a 3 star or a 4 star. My monitor is an Acer XG270HU.The shipping was fast but when it arrived the package was very damaged. The outer package was destroyed (the amazon one) and the inner package had been damaged because of it. The contents of the inner package looked fine so I went ahead and tried it out. The installation was not really a good experience. The "stabiliser" doesn't fully work, it's just a suction cup and the XG270HU (which is "guaranteed" to work) monitor bends inward just where the suction cup is so only half of the suction cup actually makes contact which made it unusable since it loses grip after assembling it to the arm. I've attached an image to show you how it is.

Bought for a different ( older) model monitor than stated and fitted perfectly….which was great. Good photos allowed me to pre-determine that the connection design was 99% likely to be suitable.

Works quite well, but it can be a bit wobbly if the monitor is not leaning back a bit. There is no support in regards to forward-tipping, so it can wobble a bit in that direction.