SYLVANIA - 921 Long Life Miniature - Bulb, Ideal for Interior Lighting - Cargo and License Plate (Contains 2 Bulbs)

Fit and work perfectly.

These bulbs provided replacements for backup lights on my Chevrolet. Once the old ones were pulled out, the new ones were simply pushed in in the same slots. It was more difficult getting the rear light assembly out to get access than it was to actually replace the bulbs.

I noticed my 02 Camry's high mounted brake light went out the other day. Went online to figure out which bulb I need.I found the same at my local auto parts store for 2 bucks more. Then Amazon told me it has the same for free shipping at 2 bucks less. I got in 4 business days. It was set to be delivered in 3, but delay by one day. No biggie.The night I got it, I pop open the cover. It's very rigid, I use hammer to tap on it lightly to give it a nudge. Once pop off, lift it up, turn it up-side-down to remove the wire connector. I can easily remove the bulb by twisting it 45 degree towards me. There is a notch you can see after removing the bulb assembly from the housing. Once that came off, remove the old bulb simply by pulling it off. This is the first time I have to replace the bulb in 16 years. The old bulb expands a bit so it's clear that a replacement is needed. Last time my headlight didn't come on, it was a loose connection.Open the package, use a paper towel to lift the bulb from the package to prevent any oil transferred from my hand to the bulb. As the internet recommends not touching the bulb as the oil will shorten its life. Insert the bulb straight in, repalce the assembly, connect the power, replace the housing. It's time for a test.I place a box on top of the trunk directly behind the housing (outside of course). Step on the brake and it lights up.Another chore completed. :)

It showed in Amazon that will fit with my rear Toyota Corolla 2002. I installed it today on the rear side maker light. It is bigger than the original one. So, I could not turn the host of the bulb to the lock because the bulb is too big and against with the light cover. By the way, I pushed the cover over it and now it is work good.

They get the job done, and are very easy to install.Needed a bulb for my license plate light as well as my 3rd brake light and was able to use one pack for both.Install took maybe 5 mins tops and they are pretty brightBeen using for about a month and still holding strong so I dont foresee any burnouts happening soon.I'd recommend them

The product is as described and fits the model of the car it said it would. With a tutorial video I found on a video site I was able to install with the help of a relative in less than 20 minutes. Works great so far.

Easy to install bulbs. At a good price l.

Replaced an older Toyota Highlanders third brake light. The high up one. Fit perfectly and lights up.. It’s NOT the two screws from the outside that you would think it is. You actually have to lift the back gate and take off a piece of molding that’s up high, YouTube is your friend. It’s quick....actual changing was less than 10 minutes....maybe less than 5.Don’t touch the bulb itself with your fingers. Use a rag or paper towel. Oil on your fingers could lessen life of bulb.

Amazon said it would fit my 2006 Audi A3... it did not. Waste of money although it was cheap. One also came cracked