7 Inch Round LED Headlights with High Low Beam DOT Approved Headlamp Replacement 6 Bulbs Compatible with Jeep Wrangler JK JKU TJ LJ CJ 4 Door 2 Door Hummer H1 H2 H6024 2 PCS

The media could not be loaded.  At $125 for a full set of headlights, fog lights, and necessary adapters, you really can't beat these for the performance. Are there better lights out there? Of course, but you'll also pay $350-750 just for a pair of headlights and $250-350 for fog lights. And that's just talking about LED, not even going to get into full HID projector retrofit costs!PACKAGING: Everything was well packaged and protected, it would take some serious mishandling for these to be damaged during shipping. All the connectors and adapters were also nicely bagged up.CONNECTORS/ADAPTERS: These were of average to above average quality compared to the previous lighting products I've purchased from Amazon. The weatherproofing aspect is certainly better than I expected based on past experience. That being said, as I do with all automotive connectors, I used silicone sealant on all points where water could enter into the connector, creating a potential for corrosion. Additionally, I used a liberal application of dielectric grease on all connections, which I would highly recommend for any connections that may see moisture.PERFORMANCE: Both headlights and fog lights are plenty bright, and both have a good cutoff as well, so you will not be blinding oncoming drivers. Color temperature is good, probably in the 6000k range, not too blue like some cheaper lights. The high beams could stand to project a hair further, but if you haven't driven with higher end headlights, you would likely not even notice this.CONCERNS:- One minor nitpick of the headlights is there are a couple small "plateaus" that rise above the cutoff line. They aren't noticeable at all when driving, only if you're parked in front of a wall or something. For what it's worth, I haven't been high beamed at all since dialing in the adjustment; that is to say, it's not even a real issue, just a small annoyance for those of us who overanalyze everything.- The adjustment screw for the fog lights is on the opposite side and as such is not able to be adjusted via the convenient access hole in the bumper. It is also Philips head instead of the factory Torx. However, it is easy enough to adjust with an "S" style bent screwdriver, after removing the plastic cover between the bumper and grille.Overall, a terrific value and highly recommended to those looking to upgrade their lighting without spending 2 whole paychecks!

‘07 Jeep Wrangler JKRUSet #1 - the right headlight would not fit into the bracket on the Jeep. It was slightly greater in diameter than the bracket, so I used a dremel to enlarge the 3 alignment slots in the bracket that the light slides into. Installed the anti-flicker module in-line between the light and adapter harness and the adapter harness to the OEM harness; both left and right sides. When the time came to switch them on for a test, the right light didn’t work at all and the left light would only stay on bright; would not dim. Requested an exchange and was approved as soon as I hit “Submit.” Had the 2nd set delivered in about 5 days.Set #2 - As soon as I opened the box, I saw that one of the wire adapters had a problem. The red wire was not crimped into the female blade connector on the 3-prong adapter and the stripped bare end of the wire was outside the adapter. I disassembled the adapter, repaired and reassembled it. I installed both lights as I did set #1 with the anti-flicker harness. Now the right light would only stay bright and the left light flickered with the engine running. I also noticed the left flicker module was making a fairly loud buzzing noise and both modules were extremely hot to the touch. I removed the modules and installed the lights without them. Now they seem to work great; no flickering and the dim/bright function works as it should.In hindsight, I’m guessing set #1 might have worked without the anti-flicker modules; should have checked before sending them back.I’m not sure how many stars to give this since the end result seems to be good. It was just a journey getting to that point where is should have been a straight forward installation. It’s only been a couple days, so if there are any changes to their serviceability, then I will post an update. These are nice looking lights and very bright. If they stay functional, I’ll be satisfied with the purchase. On the bright side, customer service was great as the 2nd set was shipped as soon as the exchange was requested.**Update**Upgraded to 5 from 4 stars.2 years gone by and no problems at all with these. One of the best upgrades to my Jeep JK I’ve done. No more brown light to lead the way!

Like many others, several people tried to tell me that these wouldn't work very well, and wouldn't fit. Well, they were wrong. this has been the easiest and best mod to my Jeep. They look, feel and function absolutely amazingly. I didn't realize how bright they would be. When I first drove out to work, I thought everyone would flash me, Nope, not one. But I could see the road, as a matter of fact, I could see the road so well, I could count pebbles. haha.. Anyway, great product, fast shipping, great fitment. I would recommend to everyone. I will come back after some time, to talk about longevity for now, Thumbs UP!

The media could not be loaded.  These lights are much brighter than stock! But unlike cheaper alternatives they don't shine the light all over and up in the trees. It is focused in a nice band right infront of you where it belongs. Check out the video that shows high/low infront of the jeep on a dark road. And of that wasn't enough, they make your jeep lookuch newer with their halo design and middle stripe. Super easy to hook up. Plug and play headlight and just one line for the halo so you can tie that to parking lights or a switch or turn signals. Whatever floats your boat.