Seadream Angled Micro HDMI to HDMI Cable 1.64FT 90 Degree Left Angle Micro HDMI Male to HDMI Male Cable Connector(1pcs Left Angled)

I used this HDMI cable with my Sony a6000 to Feelworld F6 monitor. The advantage is with the left-angle downward positioning of micro-USB plug too camera when mounted on a gimbal. The only minor drawback is that Seadream doesn't make a 12" or 15" cable, ideal length betw camera and monitor when on a gimbal. The 20" length worked fine, but had to put a small loop in cable to shorten length to ideal.Several other reviews have stated that the micro-usb plug broke off. I can't envision that happening unless you handling camera rough or placed stress on cable while plugged to camera, Seems sturdy enough to me, and on a gimbal there is absolutely no tension or stress on the cable. But since I haven't used the cable much yet, I can't attest to the durability or signal quality over time. But straight out of box, plug quality, HDMI signal quality, and display sharpness seems good.So if you have a Sony mirror-less camera, a7, a7R, a7S, et al and 20" is a good length, I recommend this cable (left-angled) since in micro-usb angles downward and out of the way, even if not mounted on a gimbal or tripod.I gave 2-stars on "value for money" because $8.00 seems slightly high for a short cable that's been on the market for years and made in China. I think it's worth $4.

I came to plug in the cable when I realized the angle of the cable was wrong. It would have pointed upwards instead of downwards when plugged in. I hadn't even thought about this potential issue. I was so happy to see the other cable was the opposite angle. I wasn't even paying attention to this when I purchased the cables and I thought "a pack of 2 is better than 1". I feel so lucky, but in truth it's just that this is a smart bundle. Thank you Seadream! It's just an HDMI cable and I've only had it for a few minutes, so I might update this review in the future if there are any issues, but the first test worked fine, and the cable materials seem OK.

If you need an angled, either right or left, micro HDMI to HDMI adapter for a camera and monitor setup, just order this. It comes with both, unlike other cables that are specific to one angle or another. I could imagine the returns on other cables since someone thought they needed a left, but in reality needed a right angle connector or vice-versa. The need to figure that out correctly is basically eliminated with this set and keeps everyone happy. For the price, you get two cables and I have even paid more for a single cable that was not the length I wanted. I use the GX85 with a cage and HDMI cable clamp and have no issues. So, if you are using it for a GX85 and monitor or similar type of setup, this works really well. 5 stars

i am using my raspberry pi 4 with POE so no troubles in my case, but if you are using the power port on the pi 4 the 90 degree connector will cover the USB-C port.

I'm using these on a video rig connecting the main camera to an external field monitor. The 90 degree angles help keep the cables managed and not sticking out everywhere. Both cables work fine, no HDMI issues.

I ordered this recently and it arrived today and the item is not as shown in the photos. The micro-hdmi connector polarization of what was shipped is the opposite of that shown in both product photos. I returned it. If this is relevant to you, don't buy this product.

Why did RPis change video ports again? needless to say, this right angled RPi micro HDMI cable was perfect fit when video output of my RPi prjects were required for troubleshooting. This is a streamline connector cable and whats best is there were two in the kit

This works great when connecting my external monitor to my Sony camera. The 90 degree angle eliminates the fear of destroying my cables or my port during use. A must have when you are using external monitors or recorders in the field.

The cables work - they put a clean signal from the camera (Sony RX10, A7iii, A7Riv) to the capture device (CamLink or cheapo). Having the angled cable is great to reduce strain on the port.My specific cables had a really strong smell that, even after several weeks, is still lingering - the smell seems to be from the sheathing of the cable itself. Again, doesn't effect image quality

Have a Camera and a monitor, want to connect them? this is the right thing for you.Although be aware that the placement of your HDMI on your camera, with this wire may block your audio or other ports. I would look into buying a straight or differently angeled wire.

Just be aware that on the A7iii, the wire goes up instead of down

I bought this for my Sony FDR-AX100 4k video camera. The 90 degree angle is a perfect for running the cable along the side of the camera. It will also work with Sony PXW-Z90 / AX700 / NX70 / NX80 models. If you don't want cables sticking out from the side of your camera, this is the one to get.

An ok product worked great for a day. And now the wire is loose and the connection to the camera monitor shut off. Well you get what you pay for