[2PACK] Whitestone Dome Glass Screen Protector for Pixel 6, Full Tempered Glass Shield with Liquid Dispersion Tech [Install Kit] with Camera Film protector

I almost didn't buy this because of all the critical reviews about it. I have always wanted to try this brand screen protector since I learned they existed. However, I have never had a ohone that they made one forThat being said this is my first tine ever installing one if these. In the past I always struggle with glass protector s. Mainly getting them lined up and then oroblems of them not staying adhered. Here are the steps I did for ny install and after 2 weeks now, have not had a problem and am extremely satisfied.What I did was: watched a few videos before I even ordered it. Then I watched them again once i received it. I opened it up and had everything ready and organized before I started. I actually decided to install mine in the bathroom after i gotnoutnof the shower. Thought being that this would help keep the dust down from the steam generated by the shower. Now my kit did not come with any instructions, which i found strange. But the video online was good enough to figure out the steps and found it pretty straightforward to setup. If you have you phone properly in the jig and ensure there is no dust or lint. This installs perfectly the camera hole at the top of the screen is lined up and perfectly centered. I dont understand why some are struggling. The only thing that i think is maybe they are rushing through it. Take your time and only do it if you have time to spare i suggest right before you go to bed to allow it time to sit overnight. It only takes about 5 minutes to do, but i would allow yourself 30mins just in case. I also kept the light on it about 5 mins more then they said to do it just for my own piece if mind to make sure it was cured. I didn't have to redo my fingerprints after i installed it. However, I have heard that in some cases some have had to. This fits fine with my case. I am using a spigen armor case and love that too.

I watched the video 3 times so I know the exact procedure on how to install the shield. When I dropped the screen after the glue was on the phone the glue did not spread evenly under the shield. Seems there wasn't enough adhesive to cover the entire screen. I used the other shield sent and another bottle of the adhesive. This seemed to have a bit more glue and after a while it spread over the entire screen but left a some spots like bubbles that did not go away. I mostly see them when the phone is off.Like other reviews I have the same problem with the biometric fingerprint lock. It won't work. I fell you're better off buying a poly protector and save the money.Oh well $50.00 down the drain.Joe

Install was stressful since there's so many pieces and steps involved, but coming from someone who has poor dexterity under pressure, it was surprisingly easy to install. I watched the YouTube instructional video once all the way through, then watched it again while pausing the steps. The screen itself is really nice, it feels and looks good. I was worried I'd be able to notice a chunky piece of glass on my phone but it's barely noticable, and the edges are seamless. I don't use a case bc I like the look of the phone so much, so being able to put it face down on a table is really nice.Also, fingerprint reader works perfectly.

In short : protection A, finger print reader D (3/10 works), installation C.I tested the protection and it is very protective. The installation is a bit stressful. So I installed it twice, the second time no issues but the fingerprint reader doesn't work. Honestly I think the pixel fingerprint reader is the worst I have ever had. It's so hot or miss with it. All the good protection screens don't work with it. The protection screens that do work with it don't seem too safe. I'm military and hard part n my phones. I blame Google more.

I was very careful, watched the video, applied this exactly right .... And the fingerprint sensor does not work (and yes, I re-scanned my prints). I also have some very small bubbles towards the top of my screen, but that wouldn't be a deal breaker. Definitely not worth the money. Very disappointing.

Install wasn't hard but it was messy. No directions included. No weight included to secure the screen. Adhesive gets all over the camera and sides when installing. Wasted one during install. Figured it may be worth it but less than a month in it cracked too. No stronger than significantly cheaper options and it is messy and a hassle to install.

While the instruction video from the QR code isn't good (the text is hard to read, no audio), the screen protector itself is great.I eventually followed a video for the Pixel 6 Pro by Josh Quinonez, which was helpful. I was able to install it without any bubbles or dust. A tip that might help is install this in a clean, well lit bathroom after a shower since the humid air wont let a lot of dust fly around.The protector covers more of the screen compared to my previous TOCOL protector. The glass is noticeably smoother too. I haven't had this on my phone very long, so time will tell how it performs. But as long as I don't get the halo effect, I doubt I'll even need the 2nd protector that is provided.

Not quite what I expected from this screen protector. I followed the installation process very closely and got the screen protector on without any issue (no bubbles). After 3 months (daily driver with google oem silicone cover on) I noticed that the screen protector edge, above the volumen and power button seemed a bit chipped. After 5 months, a mark started appearing under the left side of the screen protector. I have never dropped the phone, therefore, I cannot attribute this to that.I looked into the warranty and I was about to file a claim, when I noticed that they request a $15 payment for "shipping" of the replacement screen. Basically, in order to receive a replacement under warranty, you still have to lash out more money. I don't think I will ever buy this band again, too expensive and not worth the cost.

I have only had to re-order this once, as the screen protectors had finally broken after numerous drops, scrapes, but did withstand a lot.I would recommend buying this product more if the price was lower and was a bit more simple to install.

à moins d'être chirurgien à vos heures, bonne chance pour installer ce verre trempé. Il y a beaucoup trop d'étapes à suivre, et si vous vous loupez ne serait-ce que d'un iota, c'est foutu vous avez gâché 40 balles.N'importe quel verre trempé à 5 euros fera bien mieux l'affaire

Protects your screen so well it doesn't recognize any fingerprint anymore. Work fine as a screenprotector, just not for a Pixel 6.

Ho seguito le istruzioni alla lettera, leggendo il manuale e visionando il video di accompagnamento: il risultato finale esteticamente è ottimo MA purtroppo, per quanto abbia provato più e più volte a registrare nuovamente l'impronta, il sensore non la rileva più.Per me, assolutamente sconsigliato.

Wenn man die Anleitung per YouTube Video genau befolgt, auf der Verpackung ist ein QR Code (Pixel 6 wählen), ist das Glas perfekt angebracht. Ich musste die Finger nicht neu scannen, funktioniert auch ohne erhöhte Berührungsempfindlichkeit (Einstellungen>Display). Anzumerken sei, dass ich ProtonAOSP v12.2.0 auf Basis des Dezember 2021 Updates mit blu_spark r45 Kernel verwende. Ich denke nicht, dass es mit der offiziellen Pixel ROM anders sein wird, siehe Feedback auf diversen Internetseiten.25€ ist relativ viel, aber für zwei Gläser, die durch den mitgelieferten Rahmen und UV-Licht Quelle mehr oder weniger perfekt angebracht werden können, ist das meiner Meinung nach in Ordnung.Einzig das Glas für den Visor auf der Rückseite mit den Kameralinsen hatte bei mir Blasen, dafür gibt es 0,5 Sterne Abzug. Da es mir aber im Grunde lediglich um das Display ging, runde ich mal auf 5 Sterne.Eines noch, es gibt keinerlei Probleme mit der offiziellen Pixel 6 Hülle, das Glas fügt sich sehr gut ein.