LET'S RESIN Epoxy Resin Kit,1 Gallon Bubble Free & Crystal Clear Epoxy Resin, Table Top Epoxy Resin for Casting, DIY, Resin Art,Molds,Jewelry

The main complaints about epoxy resin are...It turns yellow. It has bubbles. It does not cure. I have used many brands and I really like this stuff for both art casting and coating. After about 24 hours a 1/4" thick casting is still a little bendable, but the next day it is very rigid and strong.UV TEST IN AZ SUMMER. I put a 1/4" x2x2" clear square that I cast in a latex mold in 100 + sun for 6 months and it was still pretty darn clear with no yellowing. Measure correctly, mix well and you will get a nice, bubble free casting or coating. Buy a cheap concrete vibrator ,bolt it to the bottom of a sheet of plywood and screw the plywood sheet to an old tire to make a monster of a vibrator if you are doing large, thick casting and worry about bubbles .Great resin and great price in my opinion.

This resin is easy to use, has a low odor, and is almost bubble free.

I've been a furniture maker for years, but I'm new to resins. I thought I would try a table top project before working with a deep pour product. I did a lot of research into different resins to find a material with low toxicity and consistent results. I think this will be my product of choice! I did a number of tests with pure resin and adding some of the alcohol dyes and I was really pleased with the results right from the beginning.I did single and multi coat pours (sanding between coats) and each pour consistently hardened in just under a day (about 60 degrees in the shop). It let me embed small elements in the pour and the transitions between layers were invisible.Edges on my tabletop were clean and the resin had the right viscosity to flow and smooth out but could cling to vertical surfaces well.What I liked:1. Mixing was easy with the 1:1 ratio of resin to hardener.2. Very little odor.3. Remarkably clear and durable final finish.4. Reasonably priced and a great way to get started with the medium.Please note.Even though it's low odor, all resins must be used in very well ventilated spaces while mixing, curing and during any sanding or planing. Use proper respiratory and eye protection recommended for the process.Also gloves and protective covering should be used to avoid skin contact with uncured resin.

I decided to try Let’s Resin Epoxy and I was pleasantly, positively, surprised that what was advertised was true 😊 Little to no oder, no bubbles , but if you see maybe 1or2 The isopropyl alcohol works well, plenty of work time and the clear shine on your finished product is awesome.I have used several different resins , I recommend this one and I will order again.

I did a test run with a small amount before using a lot for my project.1. They are right, it doesn't smell which is great.2. It only took 24 hours to cure, but the caveat is that it was a small test amount so that may increase the time.3. There were a ton of tiny bubbles when I mixed it so when it cured it looked somewhat cloudy. This probably could have been avoided if I stirred it together SLOWLY like the directions stated. There was a miscommunication when I mixed it lol. I did notice that SOME of the bubbles dissipated between the time i mixed and the final cure.4. The epoxy is thick. I'd say the consistency of honey.5. It got every detail of the mold.6. You can only do one shallow pour at a time. The directions state 200ml max for each pour. This wouldn't be the right project for a deep mold or pour unless you don't mind doing multiple small ones.7. I didn't feel heat coming from the epoxy in my mold/cup

I brought this resin and oh my!!! This is the clearest resin I have used, very low bubbles and the odor is minimal. It dries pretty quick and haven’t seen any yellowing. The price for quality is worth it!!

This is so easy to use since it is a 1 to 1 ratio. Less bubbles than any other ones I've used and clear. Love it

I did two larger molds and five smaller molds. This size half gallon is perfect for doing a handful of molds. It’s so smooth. Follow directions! No bubbles, heat with water bath. Truly if you slow down and follow directions, it’s a clear pour.