ERYONE Filament PLA+ 1.75 mm,3D Printing Filament PLA Plus for Most FDM 3D Printers,Dimensional Accuracy +/- 0.03 mm,1 kg (2.2 lbs) / Spool,Gray

Love this filament never had any issues with iit. Perfect every time.

Extremely pleased with this PLA+ filament.I have used various filaments for my ender 3 & have found this pla+ to give great results.The adhesion to the magnetic base & also on glass is very good, so far not a single issue with adhesion.I have bought a few colours and each have worked at same settings without issue.The finish quality is much better than a lot of other standard PLA and this PLA+ is definitely stronger.I will definitely be buying more, in fact my next order will likely be going in before the weekend - just need to decide on colour!!Highly recommended

Very nice quality filament & I am very happy with the result. I have tried filaments from eSun, Anycubic & Sunlu & this beats them all. Not had any tangles or problems from it, it adheres to the build plate well at 60c & prints very well at 200c. The models are accurate & look good as well. The only change I wish they would make is to use carboard recyclable spools. I have a roll of their PETG as well & that is equally as good. Included a couple of pictures of the type of result.

Bought some black PLA+ and impressed with the results. Printed several objects with zero failures and nice finish. After calibration prints I found the best results with hot end at 200-210 and bed at 60.I then bought some red PLA+ but I am still working to find the right settings. Bed is calibrated to the point I can get good results using various materials from various brands. Whatever settings I choose I get gaps in the first layer. Printed several bed calibration tests changing temp, speed flow and z-height but results are similar. At best the finished prints are acceptable but I would hope to get better results.I have done several test prints with this and after playing with various settings in Cura I have found the best results were achieved by just changing initial layer flow to 105%. Wasted a lot of filament but learned so much about the hardware and software and now getting some great prints from both black and red. Just bought some blue and hope to have continued success. Now one of my go-to brands

I am using Eryone filament for over 3 years now and I have to say they kept high quality very well.I have used many filaments, white, black, marble, red, grey, you name them. Every single filament gave me amazing results. Not only different colors but different types like PETG, PLA, TPU and now PLA+.To focus on this white PLA+ filament, it is super simple to print with and after printing temperature tower it prints well with 195ºC - 200ºC. Temperature above will result with stringing and bellow will result with under extrusion. Snow white just as it should be and perfect for lithophanes or any other prints where you want the white colour to pop out.I am using the filament on my Ender 3 v2 with stock profile and no issues at all. It is consistent, melts and extrudes perfectly and layers adhere super good.This review might look hyped but I found every type of Eryone filament is the only one that worked super well from start till end of the roll. This is definitely my go to brand and filament as I need a reliable material and to get things done with ease and in time!

Best I have used for lithophane photos. I used cura v5 settings for my creality s10 pro. Very happy with the results. Also great value for money.

Coil arrived very well wrapped, and dry! Not like that wet stuff other company’s have left folk with previously.Printing with this filament is nice and easy. Adheres to a clean bed as it should using only a brim setting which works fine for me.This particular set of prints is an experiment on an Ender 5 with a 0.6mm nozzle, 0.2mm layer height, at 205degC end and 55degC bed with an ambient room temp of 21degC running at 80mm/s.The colour is smooth, not quite silky but a nice sheen to it. I’ve measured with my vernier callipers and the coil is very even along several measurements during printing. All good signs of a good factory process and quality.I’ve recently completed a 3day 4hour print using Eryone Orange PLA and that too was amazing to use.Looking forward to trying some more material in future!

This is really nice filament to use. It results in quite a shiny, black finish which is almost like glass if you print face down onto a glass bed.No issues at all with stringing and really good bed adhesion. It bridges really well too, so you don't have to use as many supports.It is wound correctly on to the spool so no tangles. Very consistent thickness of filament, so no under/over extrusion when the printer is properly calibrated. I've made loads of good quality, strong parts with it.