Black Side Perforated Leather Grey Marker Steering Wheel Protector Cover Hand-Stitch on Wrap Fit for Ford F-150 F250 King Ranch/Lariat/XL/XLT/Limited/Platinum/Police Responder 2015-2020

2020 F250 - This is a nice quality product. It fits pretty dang well, except for one spot - the very bottom, 6 o clock where the backside should tuck in. It's too short by about .5 inches. I had to make 2 cuts, 1 at each corner to get it where I can live with it, otherwise it wrinkles in that spot and would've driven me crazy. This product is however MUCH better than another brand I tried first. Tip: Take your steering wheel off first. It's easy to do and will save you the headache of working from the driver's seat.

The product fit snug. I like the end result compared to my stock steering wheel which had some scratch’s. Really take your time getting everything tucked in and aligned before sowing. Once it is lined up it isn’t too bad to sew. Don’t worry about the small gap (if everything is lined up first) as you go along just tighten each strand to make it nice and snug. The install is where I think people don't like the product. It fit my F150 perfect, it is just a bugger to get lined up. There is a tool to tuck in the fabric around the bottom and side. If you line everything up correctly there is enough material. When sowing don't skip threads as the fit is very tight and must flex over the groves for your hand’s other spots that are shaped differently. Before tucking in the sides and bottom apply the double sided tape to help get a nice tight fit and better hold.

Honestly it is a decent product, not great and not as bad as some reviews make it seem. It took me forever to install this. Probably took 6 hours when it was all said and done. I took my time and wanted to make sure it came out good. It looks fantastic, and feels pretty good too. I have a few wrinkles at the very bottom back side of the steering wheel. I also have to cut 2 little slits in the leather to even get it close to fitting in the bottom trim pieces of the steering wheel. I feel like it need about a half inch more leather at the bottome to be able to fit better.Overall im moderately happy with the results, its not 100% perfect but a huge improvement. For how much time was spent on it i wish it came out perfect. I also have man hands and threading the needle was tough for me, my hands were cramping at it was a long tedious process.To be completely honest i will probably never to that again, if i ever want to have a leather steering wheel in the future i will buy a whole new steering wheel for about $300.

I put a lot of time and effort into the installment of this steering wheel cover and was really happy with the materials and thread provided (very strong)All the supplies you need are included and straight forward if you have experience with sewing.The unfortunate results I have with the product are located in the YELLOW, RED & BLACK.In the YELLOW/RED the portions you need to tuck into would not properly tuck or reach like the left hand side did and I had very evenly proportioned the entire cover prior to sewing.This was extremely disappointing because I was 75% complete if not done once this was occurring.I am confident in my work and did not want to potentially damage the adhesive and struggle greatly to see if realignment would help the issues but it was not worth the cutting of so much thread and restarting the process again.In the BLACK I had an issue on both the right & left hand side due to the diameter of the O.E.M. steering wheel having a bulge for grip, this led to a noticeable gap in the cover and you can feel it with your hands as well. (NOT THAT BIG OF A DEAL TO ME)If it had more material for tucking into the steering wheel I truly believe this would have resolved the issue I personally experienced.Besides the issues I experience after installment, I would say that it looks great and feels good.

After reading the instructions and watching the F150 video I spent three hours putting this thing on. The instructions don’t say anything about tucking the backside of the bottom part into the wheel and there wasn’t enough material to do this easily so I figured it must just stick on with adhesive. The adhesive is not strong enough to hold the back flap on now I have the option of completely redoing the steering wheel or cutting it off, I decided to cut it off but now the wheel feels weird there because it isn’t completely covered. They really need to supply better instructions with this wheel cover because it is such a time-consuming thing to do. It would look awesome if it worked out but unfortunately I’ll probably be cutting it off and wasting the $60 I spent on it.

Seems like a very good quality cover. Soft as if it’s genuine leather just like the factory seats. Time consuming and tedious to install but if you follow the steps and take lots of time to correctly line it up as you go it turns out great. Took me 3.5 hours and LOTS of patience but it’s worth it.

good fit with 2016 F150. just be patient and budget few hours+ to stitching the cover.

was short a bottom area

Better than the factory foam. Leather size could have been better cut for the wide bulges and variations of the steering wheel. Fits ok but you will have gaps as it won’t close. If you pull too hard the stitching will rip. Had to use super glue in the bottom cause that tape wasn’t holding the back bottom for my install.

I requested a custom design of Grey marker and thread instead of red. This supplier obliged my request and produced my request. I received my order in acceptable time, the install went very well.Fit and finish were excellent.I am extremely pleased with finished product - Looks Great !

The wrap didn’t fit the bottom part of the wheel properly and also the thump grips have a bit of a gap . Worse of all, it arrived a week late

this is garbage , junk