460PCS JST PH2.0 Connector kit 2/3/4/5/6Pin Plug with Terminal Wires Cables Socket Header Wire Connectors Kit

I liked this kit. It worked great for my need.

The adapters are all paired nicely and there is a good selection of sizes to suit your needs. Great price.

I used the ribbon cable that came with the kit. After crimping with the proper tool, I had difficulty pushing each insert into the housing. This could have been the crimper so I'm not faulting this product for that, besides, tight is good to prevent falling out of the plastic housing. I will say that the box itself has a very loose latch on one side so I don't know if I can trust it to stay together. Hopefully the snap hinges will help reduce spills.

Good quality and fitment. Connector is solid and a very good value

I have an Anycubic Kobra Neo and they are notorious for having the wires on the heated bed break. Cheap wires with lots of movement. I bought some better quality wires and these connectors and even though I didn't have the tool, I made it work.Some small pliers, tweezers, and a lot of patience and it'll work.

Includes what I needed and there's a wide variety of connectors. Haven't used any of the solder headers.This was perfect for adding a 2 Pin connector to my Creality Ender 3 Pro Hotend Fan wires when upgrading to a BIGTREETECH SKR Mini board.

I had a few led rc lights I wanted to tighten up. This was the perfect kit to have.

Have 2 complaints about packaging, and clarity of labeling:First I noticed when unwrapping the box that many of the plastic connectors were jumbled up into the wrong sections. Some of that is intentional since there are 10 sizes of male connectors in the kit, but only 8 divided sections holding them. Looks like they intended to put the 2-pin, and 6-pin connectors together since they're the most obviously different. But freshly opened, there were also incorrect sizes in the 3, 4, and 5-pin sections.The second issue is the cover of the box shows the crimp on female pin connectors as having a rectangular cut-out, or rectangle/circle cut-out on the sprue to indicate the different sizes. All of my box's crimp female pin connectors have the same rectangle marking. According to the picture, that would mean I got all larger crimp on ends, but it does appear that I do have slightly smaller ones on the PH side of the box.My biggest issue is with the crimp female pin connectors not snapping securely into the plastic ends.They're supposed to lock into to the plastic ends after you've crimped them onto the wire. I did a few and the little bur/flange that sticks out that is supposed to "snap" them in place just doesn't stick out far enough to hold securely.I was using the XH(the larger ones), and they were simply not holding. The XH plastic ends look to just be friction fit, but there isn't any noticeable friction while inserting the piece.Oddly the smaller PH plugs look like they're probably better. The crimp pin connectors still have a tiny bur, but the plastic ends they snap into have a little flexible piece that looks like it'll grab better.I don't know what to say, it's a good price for a large selection of pieces. But I'm not impressed with the quality. They're frustratingly small pieces to crimp, and then when they don't hold in the plastic pieces and you've got to redo them it's super annoying.