Dash Installation Trim Kit for BMW 3 Series M3 E46 One Din Radio Stereo Panel with Wiring Harness Antenna Adapter

Many others said it doesn't fit a single DIN radio.That's because it doesn't. I read someone actually try and blame it on the "sleeve" that comes over most single DIN radios that is used to mount it.Nope. That's not it.It doesn't fit because its incorrectly sized. It MUST be cut to fit, and that makes it even flimsier than it would be otherwise (and its REALLY flimsy).Spend money on a different one from a reputable company.(look at the pic. One end of the radio is flush with the opening. The other is about 1/2 inch overlapping the other side).EDIT:So, I must apologize for my first review. I, like most, assumed the radio would mount the same as an American car. This is NOT the case.The radio does not mount to this trim piece.The radio is placed in the dash, and then this piece surrounds only the front of the radio, not the body of it.If it were to mount around the body of the radio it does not fit.When it is placed only over the face of the radio, it fits perfectly (see my second photo vs. the first).Yes, this piece will work for a single DIN radio. You just don’t mount it like you would traditionally.The radio is very secure with this piece placed only over the face; it traps the unit solidly against the rear post mount.

Me gusto el material y el plug de cables exelente sin errores para el bmw, lo que si es que el dash tube que modificarlo ya que la radio de un din no ensamblaba bien

My trim was cracked due to a poor radio install! The harness was the push for me to order the blaupunkt radio and now my dash is perfect again

Would have given 5 but the quality of adapter isn't the greatest loose pins. For the price why not . But did the job

The harness and faceplate are great. The antenna; I'm not sure. I ordered the one people suggested as they said this one doesn't work. So I just went with it.To get the harness to fit correctly, you NEED to remove the center vents and put the harness ABOVE the headunit so that it can fit properly; if you don't heed my advice... have fun wasting hours and wondering why the headunit won't fit!!!!!!!!!

The plastic dash trim and wiring harness is correct for a 2002 BMW e46 3-series. The antenna adapter is not.The plastic dash trim will need further trimming on its sides in order for your replacement radio to fit in correctly.

Harness is a great thing for the money. Faceplate could be better I spent an hour dremmeling it to get it to fit. Overall decent

The media could not be loaded.  The left side of the face cover needed some ‘filing’ - but after that it was a perfect fit.

It won’t allow for steering wheel function buttons to work also need to cut to fit a single din.

Dash bezel needed a bit of trimming, but the radio adapter and harness worked great! Even with the Harmon Kardon system. Installed in a '01 330CI with a JVC single din. Do note the plugs will have to be stuffed up under the dash to fit everything.

Fit great, had to bend the plastic the smallest bit, but fit well and was easy to install

So i baught this kit for 14$ not a bad price. Here is where this kit fails, the pins inside the wiring hanress adapter are super loose so i had to glue them to hold them still. The faceplate, as many other have reviewed is the incorrect size! It dose not fit a single din radio! So i had to trim it to make it fit. The only thig i didnt have to modify was the antenna adapter which was still hard as hell to push in... So why 2 star insted of 1. Well at the end of the day and after some modifications it still did the job.

Works great fitment is perfect