TNP IR Emitter Extender Extension Cable (10 Feet) - 3.5mm Jack Infrared Red Transmitter Blaster Blink Eye Wire Cord Compatible with IR Repeater Extender System Kit, Xbox One (1 IR Eye Emitter)

My grandma lost her remote, and we couldn't get a universal remote to work on the TV. Turns out that we needed one of these in order for the TV to pick up the signal. Universal remote is working properly now thanks to this.

Very nicely made. Wire feels high-quality (very supple). Molded casing on the miniplug end is sturdy with a decent anti-fatigue "tail" on it. Unit comes with the 3 wires which power the emitters bonded together until very close to the emitter heads, but you just easily pull them apart to split the wire to where it works for your application.I am pretty sure I have a nonstandard use-case for this, so I'll post the details in case anyone else happens to be searching for these keywords.For my application, in my RV I have an older IR repeater (a RiverPark AVI-20 connecting block) that uses RCA (phono) plugs to connect the emitters (a.k.a. transmitters or "blasters"). Apparently no one in the known universe (including Riverpark) makes these anymore; everyone uses 3.5mm mini-plugs, now, like these. So I bought an adapter ( Monoprice 107180 RCA Plug to 3.5mm Mono Jack Adaptor ) and these emitters. I fully expected this to fail miserably. Or, at the very least, be wired "backward" to how the repeater expected it (because Murphy's Law) and have to re-wire these.Amazingly, it works *perfectly*!

Did not control 3 devices on my system. Had everything setup for 3 devices, even had a two emitter cable control my 3 devices most of the time (it would sometimes not turn off TV). They were all setup on the Xbone fine, though this wouldn't work with any device, even tried to reconfigured Xbox, still nothing. Went back to two emitterr device because this didn't control my 3 devices: TV, Cable Box, Surround Sound.Let me be clear, my two emitter device controls the Cable Box, Surround Sound perfectly, it only sometimes doesn't turn off the TV when turning off the Xbone. When turning on Xbox, it turns on ALL THREE devices just fine with my two emitter device. This product wouldn't signal ANY of my devices. Sticking with the two emitter and simply turning off TV with cable remote. refunding this.

Well built little extender cable. Works perfect as an extender with existing IR transmitter (Blumoo) which can't directly beam to components because it doesn't have a direct line-of-sight to the components. Those components include a TiVo, Yamaha Receiver and Sharp TV. IR emitter transmitters don't have to be placed directly on the device IR receiving sensor but in line of sight a few inches away. I use a flashlight to locate the IR sensor on each component. It's usually a little round hole somewhere on the front surface of the component. I then use bluetac to hold the IR extender sensor on the flat surface in front of or attached to the bottom of the shelf above the component. Highly recommended.

I purchased this along with the  Monoprice 107121 2.5mm Mono Plug to 3.5mm Mono Jack Adaptor  to use with my Logitech Harmony Smart control. It plugs right into the rear port of the Logitech Hub, and works well on my Onkyo Receiver, LG Blu Ray and Verizon Fios STB. Having read reviews on similar IR emitters, I knew this one fires the IR out the front, not through the bottom. So, using the included tiny self stick pads (would be great if it came with extras), I adhered each emitter to the face of each device, adjacent to, (not on top of) the IR sensor on each device.Works really well, and solved my issue with distributing the IR to multiple devices inside my BDI audio cabinet.Make sure you buy the Monoprice, (or similar) adapter linked above or the 3.5mm plug will not fit into the Logitech Hub.

I needed a couple replacement IR cables, and these work perfectly with my system. The only very minor detail worth noting is that they don't have sticky tape to adhere to the box, so I had to improvise. They're 10 feet long, which is much more than I need for my application, but the length could be very useful for others I'm sure. I'm very pleased with the quality and compatibility of these cables.

I use this with my Xbox One to control my TV and audio receiver since I don't have a Kinect. Really simple to install and worked like a charm. The included adhesive works well and the signals still fire through the adhesive. The cables are plenty long enough and easy to split if your two devices are far apart. The tips are very small as well, so they don't stick out like a sore thumb when attached. The clear red body isn't very noticeable either, that just helps the IR signal transmit through every side of the tip.I highly recommend this if you need to control two devices with any home theater box, Xbox One included.

These are VERY weak. If I place them at JUST the right distance... at EXACTLY the right angle... and rub my tummy while patting my head, they might operate the device once out of every 5 key presses. I have other extenders in another room as well, so I interchanged them to make sure that I just didn't have a bad hub. Nope... the other emitters work great. These are just junk. I bought 2 of them by the way. Both worked the same... which is to say weakly and rarely. I am returning them.

Produkt TIP TOP

Nicht funktionstüchtig an einem AV-R. ( Pioneer und Yamaha ). Klebestreifen waren in dem mir zugesendeten Set auch schon verwendet. Artikel war auch mit einer LPN Nummer beklebt und nicht so sonst EAN/ASIN oder X-ASIN. Nicht dass erste Mal dass Amazon reduzierte, benutze Ware als neu verkauft.

Funktioniert, man muß jedoch sehr auf die Ausrichtung achten. Ggf. das Ding auch direkt vor den Empfänger platzieren. Ausprobieren ist angesagt, wie so häufig.

Niet geschikt voor tv ontvanger Canal Digitaal.

Das gelieferte Produkt entsprach nicht der Produktbeschreibung. Es wurde ein IR-Emitter mit USB-Anschluss geliefert, welcher nicht mit der X-One kompatibel ist.