FRAME: 1 7/8" 13ga. GALVANIZED STEEL. (.095 Wall, 2.4mm) 4 frame pieces + 4 legs = 8 total pieces JUMP BED: Made with top grade polypropylene mesh. Reinforced with a vinyl boarder to strengthen the material where it attaches to the springs and helps eliminate the natural motion in the mesh during use. UV protected thread throughout. SPRINGS: #100 springs that are 8.5 in. long with 54 coils. Galvanized and tapered. PAD: Heavy 18 oz. vinyl-coat cover on top. Poly mesh is used on back which allows the pad to breathe and let out moisture. Inside are 2 layers of closed cell foam. MANUFACTURER'S WARRANTY: The manufacturer offers a full 5 year warranty on all parts. (Frame, Pad, Springs, Bed and Stitching) The Warranty covers defects in materials and workmanship and normal wear. ENCLOSURE FRAME: 1 5/8" 16 ga galvanized steel. There are 8 uprights on our enclosure. At the top of those uprights is a ring, also built of 1 5/8" 16 ga galvanized steel. This ring stabilizes the uprights and make the frame stronger than any other design. Our mounting hardware consists of heavy duty clamps with 3/8" bolts. ENCLOSURE NETTING: We use a quality, close weave netting that will not allow little fingers to get trapped. Our nets are what we call, inside mounted. That means the net mounts at the edge of the jump bed, not on the outside of the frame. When a jumper impacts the net, the netting moves outward. As the jumper slides down the net, they land on the trampoline pad. On a frame mounted net, the net moves away from the trampoline and it is possible the jumper could get trapped between the net and the frame.
Trustpilot
1 month ago
1 day ago
