bilbil59 Inches L-Shaped Electric Height Adjustable Standing Desk, Stand Up Home Office Desk with 4 Memory Preset Options, Double-Beam Construction, Anti-Collision Technology

Overall exactly what I wanted. Sturdy, raises/lowers, looks good, fits in my office perfectly.Is it easy to put together? Yes. Does it take a lot of time? Yes. Took me about 1.5-2 hours. I’d recommend having another set of hands to help, but you can do it yourself.The motor is not silent, but it only takes 10 seconds to raise from lowest setting to the highest. Easy to program. The cut out is beautiful for writing/typing. The top is solid and looks gorgeous. I was worried it would look cheap and I’m glad it doesn’t. It comes with a basket in the back for wires and such, two hooks for the sides, and inserts to collect the wires, and adhesive wire gathering hooks for under the desk (huge benefit, because all the wires make a mess under If you don’t).I’d recommend this to anyone interested in a quality desk, standing or otherwise.

I had my doubts about this relatively inexpensive standing desk but have been greatly impressed after two weeks of daily use.While the top is only 18mm thick its a very dense hardboard material that doesn't sag where my dual monitor mount attaches.The single motor works fine, too. It has no issues lifting the surface.The top is composed of four panels aligned with dowels and then held together by brackets. There are some slight alignment issues along the front curve.

This is an awesome desk. Good value for money.Quality wise its a great product. Its very sturdy. It looks elegant. Casters is a good thing to have. It comes with it. I am using the desk with casters. It wobbles little bit when moving but its totally understandable as I am using casters on carpet. I am very positive if you use it without casters its well balanced.Its easy to assemble. Its gonna take some time. Instructions are easy to follow and well written.Its not loud when you move desk up/down. The two hooks and a cable management rack/grill are good utilities.Provided holes on top of desk to pass cables are of top quality. They hold cables and stop them from dropping down. That is the most useful thing they provided with. No more going under the desk to get your charging cables.The only negative thing I experienced is some of the screw housings at the bottom of table top are slipped. I mean the holes where we put in screws. When I try to tighten those screws they kept on rotating forever hence not giving the tighter grip. I am not sure if they keep my table top attached perfectly to the bottom part for a longer time. Otherwise its a really good desk.Note: The shelve/rack on right for placing laptops and under the desk keyboard tray isn't included with it. I bought them separately.

This desk has 4 height settings which are really easy to set and change. It is also pretty spacious, I generally have two open laptops with mouse pads, a monitor, and at least one notepad on the desk (plus phone and coffee of course). It took me less than 2hrs to assemble it by myself but it would be useful to have a helper close by as it can be heavy/awkward at some points of construction.The top of this desk is "sectional" and there are seams on the surface. It doesn't interfere with anything I do, but it could be a problem if someone wanted to use a big section of the top for drawing/art with no pad under the paper (hope that makes sense).Overall, I am very happy with the product and would recommend it to anyone looking for a reasonably priced conversion desk.

Great packaging. Each piece was individually wrapped, clearly marked with a number of letter. It took me about an hour to put it together. ( I was taking my time). Love the look and being able to adjust the height. Will be perfect for work!

I am super happy with this desk. It's nice and solid. The parts are all very well designed and made. The sit/stand mechanism is quiet and smooth and has a lot of range. The surface is nice. The finish on all of the parts is nice. It came with a few extra screws, etc., just in case one falls down a heater vent. It comes with a choice of feet or wheels. I'm short, so using the feet let me lower the desk another inch and a half, which really helps.The drawings and notes in the instructions are nearly flawless. The fasteners are all in labeled pouches and the instructions refer to the pouch letters so you don't have to guess. The drawings are very clear, and for the most part, they steer you away from mistakes. I only had one problem putting it all together--and I fixed that by loosening a few screws so I could get a couple of difficult ones into their holes.The corners are nicely rounded, but the edge is a little sharp. A wrist wrest will solve that, though.

Works as advertised. Has settings to hold your height preferences. It is contoured in the front where you stand. It has rollers or feet pads; you can choose which to install. The wire basket organizer is helpful, but it is very full with a docking station and a power strip. One of the desk grommets broke pretty easily (that's where the cords go thru the hole in the desk) so I bought a new sturdier set of those grommets. The motor is pretty quiet. Lift mechanism is smooth. These are 27 inch monitors, easily fits two monitors and my laptop and headphones and a full keyboard.

I wanted to buy a standing desk so that I could use it both as a laptop desk and a music station, being able to put my keyboard piano on it and play while still sitting. Overall, I'm very impressed with it considering how inexpensive it was. It's sturdy, was decently easy to assemble (minus how heavy some parts are), the height adjuster works well, and it's big enough to have my monitor, keyboard, laptop and recording gear all sitting on it.The one thing I didn't like is that when I was putting it together, there was a small ball of metal (almost like weld splatter) on the bottom of one of the legs. This ball made it impossible to fully screw the foot on. I had to get a metal file and file it down. Bilbil could take more time to examine each part to make sure it will assemble properly.Overall, I'm very happy with this desk and I hope it lasts quite a while.

この手の電動机は値段が高く、特にL字型は10万円クラスがほとんどでした。購入価格が26000円だったので破格です。ただ、安いにはそれなりの理由があります。＊結構重大・モーターの電源ケーブルが潰れて変形してる・引き出しパーツは開封済みのものが入っていた・引き出しパーツがびっくりするほど臭い・ネジの本数が足りない＊割りと軽微・天板が汚れてる・説明書が実物と異なる・増設棚の板が写真と違い角ばっている基本的には品質管理の問題ですが。これを全部解消してというのは値段から考えると贅沢かもしれません。ただ、電源ケーブルが潰れてるのは結構痛いです。交換するにしても足をまるごと一本交換しなければならない仕様なので、非常に面倒。梱包の仕方とか、当たり外れがあるかもしれません。モーターの動作やネジ等パーツの精度は値段以上です。オプションの引き出し、ヘッドフォンフック、ドリンクホルダーはかなりチープなので使わないかな…といった感じです。机の板や裏にキーボードトレー、コンセントホルダーを付ける予定の人は注意してください。机板は特殊型、机裏は動作パーツが多いなど、他の机に使えるオプションパーツはかなり制限されます。この手の動作机を使う方はケーブルの処理にも注意してください。怠ると机以上に高価な機材を壊すことになります。

The product is very good for the price. Flexispot is my first choice in desk but it is an expensive standing desk brand. BilBil is a Flexispot desk without the thick one piece desk top, instead using 4 separate pieces to assemble. Quality for price is very good for 55” standing desk. Assembly is very easy and designed well.

ひと昔前ではこんな価格帯の電動昇降はなかったかと思います、値段の低さに驚きました。この価格帯でこの品質の電動昇降は凄いリーズナブルだと思います。机の面は広く、モニター3枚置けたので満足しています。電動昇降も問題なく機能します。組み立てもそんなに難しくなく、ゆっくりと慎重組み立てれれば問題なくできると思います。机の板面が分割してあるので、板面の上に別途でカバーやらシートをかけてあげたほうが隙間などに細かいゴミや汚れが入るのを防ぎます。トータルでとてもコスパのよいか物ができたと思います満足しております。

部品が重く組み立てに時間がかかりますが、大きくて便利です！

The media could not be loaded.  プリントの木目調柄とホワイトのツートンデザインで、とて高級感があり気に入っています。高さ調整が可能で、しかも電動で任意の高さにプリセット出来る製品は初めて使いましたが、とても良いですね。低くしてソファに合わせたり、高くした場合はちょっとした打ち合わせや、コーヒーブレイクに丁度よく、ゲーミングやPC専用では無く色々な用途に活用できるところがgoodです。説明書には特に書いていませんが、キャスターも取り付けられますので、頻繁にレイアウト変更のあるオフィスでも重宝しそうです。