4 Pin LED Splitter Cable Flex LED Strip Connector 4 Way Splitter for One to Four SMD 5050 3528 2835 RGB LED Tape LED Ribbon LED Strip Light -30cm/12in Long (1 to 4 Splitter, Black, 2pcs)

These 4-pin splitter cables do what they were intended to do. The RGB pins slide into metal lined holes when making an electrical connection and can easily slip out of those holes. That problem isn't a fault of the TronicsPros splitter cable, but is innate in the design of the RGB 4 pin connection. I motherboard manufacturers designed the RGB connection as an after thought. There is nothing a splitter cable supplier like TronicsPros can do about this connection weakness. I used black electrical tape to secure the 4-pin splitter cable connections together. The tape doesn't show in the black desktop computer case and its taped fastness allows me to manage my cables without concern of a connection coming undone when being stuffed out of sight. My case and fan lights are now fully functioning and I thank the TronicsPros RGB three way splitter cable for making it possible.

accidentally bought the rgb 4 pin version but i found out you can cut off one of the pins and on the connectors and it works great!

This device allows you to wire different sets of LED lights by using a single feed. This allows a parallel feed vs a series feed. LED lights work properly when they receive equal voltage. There is a voltage drop if wired in series and the lights at the end of the string will not be the same color as the ones at the beginning because of the voltage drop. See the distances between the columns in the picture, yet all lights are the same color even though I had to snake lengths of feed wire to reach all the columns. Also, what you don't see is that there is a fourth string of lights lighting the ceiling area in the room itself.

Works great, as advertised, looks good. Highly recommend

I used the splitter cable to connect 3 RGB LED strips to a single RGB LED strip controller, and it works fine. Plug and play, without any problems. I recommend it. When connecting the splitter cable to LED strip, you need to match the arrows on the surface of the 4-pin female connectors.

There is no adhesive. It's just a splitter. Works great but connections are not tight. I heat shrinked all the connections.

Very nice Great purchase

Works fine but 2 issues. First one is that if you're using this with an Asus Aura Sync board, you will need to remove one pin from the included adapters with a pair of pliers. Second, these will not stay connected to anything unless you tape the connectors together.

لم يكن المقاس المناسب. صغير. ليس ما توقعته

Can be use for general purposes

Llego en buenas condiciones, muy util para conectar muchos perifericos rgb y si cortas un pin a los conectores tambien sirven para argb