Particulate Mask Full Face Mask Safety Respirator for Paint Spraying House Cleaning Dustproof Protection with 1 Pair Filters,1 Set

Mask fits well. I wish the straps locked/tightened better under pressure.The mask does still fog up if you dont have adequate air flow, your sweat dripping into the mask tends to be the visibility culprit. For the price i cant complain, its come through clutch

I have a 3M half face respirator (6503QL) that only covers the nose and mouth. I normally wear that with safety glasses but occasionally wanted something that covered my eyes at the same time. This fits that role perfectly. I have a large head and I do have to loosen all the straps all the way. It is tight putting it on and taking off, but after it is on I have to tighten a couple of the straps. After adjusting it for fit and placement I tested the seal by putting my hands over the filter ports and inhaling to get a vacuum and checked for leaks. It actually seals pretty good even though I haven't shaved in a few days.As far as comfort, I'm pretty sure any face mask is not going to be very comfortable for an extended time. With that said for the short time I had it on it seemed perfectly fine.The lens is clear and sturdy. It has an interior mask/partition that covers your nose and mouth keeping moisture from the lens. The air intake is outside of that and the air flows in over the lens and into the nose/mask area through valves. This is a nice design because it keeps the lens from fogging up. It has the round exhaust valve in the lower front center and above that is another round port that has what I will call a diaphragm that does not allow air flow but I believe is for you to be able talk and others to hear your through.It comes with a couple replacement strap hooks and 2 filters. The package the filters come in states they are good for 3 years and inside it has a paper that has the date of manufacture, in my case 20220305. I don't think these go bad after 3 years but it is nice to have the information regardless.As I mentioned I have a 3M respirator and since I had 3M filters for that I tried to see if they would fit on this mask. Bingo! An exact match! It must be a standard 3 prong round hole. I have the 3M 2091 P100 Particulate Filters but it appears any 3M filter will work and you can select any type of filter you need. Off-brand filters will probably work as long as they are 3M-compatible.

Being extremely allergy prone, and also likely to develop bronchitis if exposed to paint fumes... I wear a dust mask for grass cutting, leaf blowing, or woodworking. For painting or using anything with fumes... I have to use a respirator. My old unit was just completely worn out... the rubber was developing cracks and tears.My old respirator doesn’t cover the eyes... no face shield... it just covers the mouth and nose. It has been difficult to get used to this one covering my eyes. When I have to do precision painting, I’ll typically need to pop on my reading glasses for up close work and then take them back off as I move onto larger surfaces. This respirator has been inconvenient in that regard.The quality seems to be decent. There are heavier duty respirators out there for those in a business where you are wearing one daily. I really feel this unit will do fine for the homeowner or occasional user... but not heavy-duty use.Personally, this unit is a little tight for me, but I do have a large head. I was pleased to read elsewhere that some 3M brand replacement filters will fit this one. I trust 3M a little more than no-name Chinese replacement filters.

I just started using this mask even though i bought it last year. I got it because i knew i would need it at some point. When i pulled it out today to start sanding i notice when i was attaching the outside filter that one vent filters inside was not included when making mask. Thats some kind to of quality control. Now i have a mask that i can't use because of poor quality control. For the price i paid i should have had a extra vent filter. I looked on outside of box and sure enough it was made ( IN CHINA .) * I did a quick fix using duct tape to seal over the open hole. I still have one vent and i can't tell if it affects breathing. I have had different types of breathing filters for mowing lawn, grinding metal, going into attic. This filter is marvelous in protecting me from sanding walls in old houses i remodel that i don't know about the lead content of paint. It's great that you can use different type filters with mask. It keeps you whole face covered and protected and does not fog up from breathing. It was wish come true i found these. I highly recommend this breathing filter mask. Save your lungs, you only have 2.

I've used this respirator on a few jobs and wanted to give some feedback. Although more comfortable than my usual goggles + respirator mask, this full face respirator is less comfortable for me than some other similar full face respirators I've used. I don't consider this to be the fault of the SYINE respirator, just an incompatibility with my particular noggin shape. I see no NIOSH markings anywhere on the mask or documentation, which would have helped me feel more confident about using this respirator. At $60 (at the time of this review) this is slightly above the middle ground in terms of cost for generic full face respirators on Amazon. Nothing terrible to report on this product, but nothing remarkable either.

This full face respirator mask fits me well but my head is not so big (about a 7 3/4 hat size). I would think larger folks may not like the fitment. Another issue, the 5 strap connectors are a bit flimsy plastic and feel like they won't last too long with a lot of usage. I would only recommend this mask for occasional usage, like a few times a month. At this price level its a good value.The included filters seem fine, P100 KR rated. They state a 3-year shelf life but was having difficulty finding any way to determine when manufactured. Seller responded that a label in the packaging indicated manufacture date. I found nothing on the packaging but I found a Chinese language label that may have fallen out and has a line with "2022v305".