Feature: These L shape connectors for Single Colour 3528/2835 led light strips comes with 2 easy-clasp connectors and a 90 degree L shape PCB board. You can attach it with your light strips directly without any tools or wielding operations. The wireless design ensures seamless layout when you need to spread your light strips around sharp corners. Compatible with both non-waterproof and waterproof 8mm Single Colour LED light strips. Installation tips: Open the cap on the connector and slide in the led strip. Make sure the poles match correctly, then clasp the cap. For waterproof light strips, you need to peel off the silicone around the soldering line first.Note: If the LEDs flicker or do not light up, it is because there is poor contact between the L-shape connector and the LED strip. To solve the problem, please follow these steps: 01.Power on your LED strip. 02.Open all the caps of the L-shape connector. 03.Insert your LED strip into the connector, slightly pull and push your LED strip to adjust the contact point between the 2 copper contacts on your LED strip and the 2 prongs in the connector. If the LEDs still do not light up, please use your finger to press a little hard on the 2 prongs in the connector. 04. If the LEDs still do not light up, please adjust the contact point between the 2 copper contacts on the L-shape PCB board and the 2 prongs in the connector, until you see the LEDs light up. Then you can close all the caps of the connector. Package Includes: 10x 2-pin L-shape Connectors for 8mm wide Single Colour 3528/2835 LED Strip Lights
S**Y
Saves you much more time than soldering.
Not much to say about these... they work as they should. Very easy to use and MUCH easier trying to navigate a 90 degree corner with these instead of bending the led strip. I purchased these in particular because they were Amazon Prime available for next day delivery. You can't beat that.
S**N
Not a reliable connector
These clamp on connectors are hit or miss at best. They do NOT make a reliable connection to the LED strips. I've decided it is much better to make connections between them by soldering them by hand using small wire jumpers.
J**.
Works flawlessly!!
I bought these for my kitchen remodel project to light up under-counter as well as by the toe-kick area. I have 1 each turn corner, so these L-shaped connectors come in handy and work very well. I tried but failed to just solder the wires directly to the L-shape PCB part, without the 2 connectors on each end. But as is, they work flawlessly. Just make sure the polarity of the light strips connecting to these connectors are not reversed, or the lights won't lit up.
L**R
Work well but don't reuse
They work well however are fragile. If you make a change and have to reinsert the strip the connection may not be good enough to not have flickering. If you can solder the connections it will be much better.
B**N
plug and play
excellent plug and play to add corners to LED light strips. there are a must if you have to negotiate 90 degree corners. the LED strips are pliable BUT unless you want to risk damaging you strips and having odd corners, use these.
M**A
Some clips didn't work
Tried to make a lighted mirror using these and was disappointed when I plugged it in. I'm not an electrician by any means, but I do feel that these don't grip the led strips as they should. My strips were loose as I could wiggle them to try and get the right connection going, but ended up failing. Needless to say, I now have an abandoned project until I can find the right clips.
A**W
Works great for most 2 connector light strips!
Product works as intended. I did have to slightly shave a bit off of both sides of my light strip with a hobby knife to get it to slide in this connector set easily. However, I didn't have to soder anything together to get it to work. Would buy again but the 10 pack was more then enough for my project.
M**M
If you’re a pro at this and need NO INSTRUCTIONS....
There are no instructions. No way of knowing how to use it. It even a link to a YouTube video. Believe it or not it’s not so intuitive to know how to cut and connect LED lights, some of us (non electricians and not so handy people) have no use for a product without instructions.
Trustpilot
3 weeks ago
1 week ago
