Beartooth Comb Raising Kit 2.0 | Improve Accuracy | Neoprene | Reduce Recoil | Made in USA

It was not as easy to put on as I was thinking but it is going to work great

Fits very tight and looks great on the stock. Definitely recommend it

Purchased for a tactical shotgun with a reflex sight. The comb of the stock was too low to see the reflex reticle. It was promised to be delivered between the 22nd and 29th of December. It arrived on the 22nd.It took about a half hour to install - it takes some effort to get it on the stock. I did not follow the instructions that called for the Beartooth to be pulled on from the butt end. Instead, I took off the reflex sight and taped over the sharp edges of the rail, then pulled the Beartooth on from the barrel end. I did it because I didn't think the small front of the Beartooth would fit over the butt. I think this was the easiest way to do it. I used two of the foam inserts to get the right eye level. Now when the shotgun is brought up to the shoulder, the reticle is right where it should be.After shooting 30 rounds, I expected some movement. And, there was some. The Beartooth pulled forward a little, maybe about 1/4 inch and the inserts move a little. But, it was not a problem, because the inserts are easy to readjust and the Beartooth can be pulled back into postion easily as well.The only reason I did not give 4 star is that I don't know how long the Beartooth will last over time or how it will do if it gets wet.All in all it is a good product. While it is not a permanent solution, it does what they claim. One other advantage of this "temporary" solution is when I took the reflex sight off and installed the iron sight, all I had to do is push inserts a little to the side and I was able to get in the right position to align the sight.

Great product, high quality and durableThis is the second rifle I’ve equipped with the comb riser. Excellent for scopes that require higher bases, puts your eye in direct line of the scope while still having a solid cheek plant

Nice idea and quality materials but it's just too tough to put on or adjust. I had to go with a more convenient configuration.

Low cost way to raise the comb on my shotgun for perfect fit and eye alignment

Bought for my Mossberg Maverick. It has a composite stock on it which is somewhat narrow. So I bought this to bulk it up a bit for a better fit. This goes on easy , just follow the instructions. I don't think tape was needed, but just to prevent the possibility that this would creep and rotate around on the stock, I did place a few small pieces of double-faced foam tape under it just to keep it in position long-term. Surprisingly enough the camo on this product looks pretty good and it actually made my inexpensive $200 shotgun look pretty cool. Now I'm ready to go get the geese!

Installed easy, feels good on cheek, looks good!Might consider attaching five or so cartridge loops on the opposite side of shooters cheek, would be very handy.