Dynofit 2 Inch Leveling Lift Kit for 2007-2021 Tundra, 2 Front Raise Suspension Strut Spacers for 4x4 4x2 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021Tundra Pick Up

Fit to my friend’s tundra!

I purchased this product to facilitate tire clearance around the inner fender of my 2018 Tundra. I purchased 275/70R 18 Mickey Thompson Baja Boss ATs to replace my stock 275/55R20 Bridgestone Altima HLs. The stock tire was 31 1/2" tall. The new MT Baja Boss ATs are 33 3/8" tall. I did purchase Method MR315 wheels that have a +18mm offset compared to the stock wheel's +60mm. This moves the wheel and tire combo outward approx. 1". My truck in stock formation would impede the tires and the tires would rub on both the front and rear mud-flaps. After removing both the tire would still rub the front inner-fender as before. I adjusted the plastic inner-fender forward, away from the tire. (Youtube has several videos demonstrating this.) However, my truck still sat nose down 1 3/4" from the rear. I installed this lift kit and now my truck sits more level. The kit comes with illustrated instructions that readily guide you through the necessary steps to install it. I found the product well manufactured, with the fit and finish exhibiting a machined appearance. An excellent finish is provided that will likely outlive my truck. The kit also includes the bolts, lock-washers and flat washers. On Toyota Tundras the lower A-arm alignment bolts are very tight, as is the lower coilover bolt. These with necessitate either an air-impact wrench or hand tools with a considerable amount t of grunt to loosen and retorque. These will consume your time the most. Otherwise, this product installed fairly easy. Maneuvering the coil-over assembly to install the first bolt through the frame-mount will challenge you. But, patience will win the day. I did not require another alignment on my truck as I marked the alignment disks on the lower A-arms prior to loosening and found them identically located on competion. Value for the money is exceptional. Given the fact most other lifts or leveling kits will demand more money.This is an excellent product. I recommend them to anyone wanting to level your ride.

I watched YouTube on how to install. There’s no need to remove the shocks. Buy correct tools as needed because you will use all of them.Go in from the top and remove the screws and the other screws. Align the new screws making sure you can seat all move on to the next one.Each install will take you 2 hours each one.It’s good to have a helper just in case.

Satisfait

After a couple hours putting this on my 2020 tundra, had to get spring compressor to slightly the spring. And now there a rubbing sound from the cv I will be lowering the differential with the other kit to see if this solves the issue.