Toyota Genuine Touch up Paint Color Code 070, Blizzard White Pearl, Scion/Lexus

The Toyota Genuine Touch Up Paint in Blizzard White Pearl (Color Code 070) worked perfectly for my Lexus and gave a professional-quality finish. The color match was spot-on—it blended seamlessly with the factory paint, even in sunlight. The brush built into the cap made application easy and precise, allowing me to cover small scratches and chips without any mess. The paint consistency was just right—not too thick or thin—and it dried quickly with a smooth, glossy look. I was amazed at how well it restored the appearance of my car, making those small blemishes practically disappear. It’s also very durable; after a few weeks, the repaired spots still look great with no peeling or fading. This is by far the best touch-up paint I’ve used, and I highly recommend it for anyone who wants their Toyota, Scion, or Lexus to look brand new again.

I had a dump trunk drop some rocks on me and gouge the plastic in my bumper. I had someone try to touch it up for me, but without extensive work, it looked pretty bad (photo 1#). Using the 040 white base coat, followed by the 070 white pearl, then the 00C clear coat with some sandpaper and polish, I was able to repair the damage myself. Be sure to clean the area well with Dawn soap to remove any wax. Avoid touching the chip with your fingers so you don't introduce oils to the area. If your plastic is gouged and has raised edges like mine (it looked like teeth marks), use sandpaper to remove any raised spots. Take your time with the base coat and use the brush. The ball point on top of the bottle is useless. Just put down enough so that it's completely white and that no metal or plastic is showing underneath or at the edges of the chip (photo #2). Once that dries, add the pearl coat. I did a few coats of that, then used 1000 and 1500 grit wet sand paper to work out any raised spots and smoothed it down (photo #3). Then I gave it one last light coat and hit it gently with 2000 grit. Once that dries, I added the clear coat. You can apply the clear coat past the edges of the chip. Once that fully dries, use 1000 grit, then 1500 grit, and finally 2000 grit wet sand paper to smooth it out. Finally, use something like Mother's polish to bring back the shine (photo #4). Give the paint a few days to cure, then add wax. I can barely tell that I had a pair of 1/2" gouges next to each other on the edge of my bumper.

DO NOT BUY. This was the biggest waste of money, and is now going to cost me even more time. The consistency is water thin. Color is clear with sparkle. So trying to touch up over a few spots where you can see the gray primer all I have now is a hazy sparkly gray. The consistency is too thin to use on side of vehicle as it just runs out of spot. So now I have to spend extra time cleaning up this junk to use a different brand.

Great Product at a Great Price!

Color matches well

This works surprisingly well for small scratches and dents only. The color match is slightly off but isn't noticeable unless you look for it.

The top review for this product is fairly accurate, in that you need to sand each coat and use all three colors (base white, pearl white, and then clear coat). What you need to know is that as soon as you use any sandpaper, no matter how fine and no matter how close you try to keep to the tiniest area around the chip, it's going to look like you removed your original clear coat from around the chip and it will look really scary, like you really messed up your car's finish. Don't be tempted to apply clear coat to this entire area! I tried it, and while it does make the paint glossy again, you can't apply the clear coat smoothly enough over any kind of large area with just a brush. So just put on enough clear coat to just cover any area that you painted, but not much more. Then, you MUST buy a polishing compound, and rub the entire area that was sanded with this--it WILL return the gloss to what looked like damaged original paint. I wish I had known this before I started!

If it's difficult to figure out if this paint matched the blizzard pearl 2018 Prius because the color goes by a few names. This is a perfect match. The paint is thin and does require several applications. If it was thick I don't think it would work as well. Just remember to shake shake before use. I love the little paintbrush on the inside. It makes it easy to apply