PLA 3D Printer Filament 1.75mm,Golden Fire, Silk Gold and Galaxy Red Appear at intervals,1kg(2.2lbs) Accuracy +/-0.05mm for ender3 Cr10 Sovol

Wow, this is some amazing filament! I print with nozzle at 205° and bed at 60°, usually have bed at 50°, but this seems to need a bit more heat. The colors with this VERTIGO GALAXY RAINBOW are great, the print amazing and the feel of the finish piece is like nothing I’ve ever printed, just wonderful.I’ll be trying one of the other colors, certainly, but will be searching for the right models to print with this filament, for sure! Happy printing for all!!May 2023; I just purchased a roll of the Galaxy Glitter Black filament; although I would describe the color more of a glitter gun metal grey, not deep or dark enough to call black. While it looks good printed, it takes some effort to get the setting right in order to get good bed adhesion for the first couple of layers. Stronghold3D’s settings recommendations vary a bit between what they list here and on their website with temps and speeds. This being said, I am finding the following tweaks are helping with good first layer adhesion and smooth prints: light layer of glue stick made the greatest difference, 220°/50°, 35 mm/s speed and set your initial layer width to 120%. I also added a brim to the prints and that helped immensely. No one or two of these changes helped alone, but together I’m not having issues.The price of the Galaxy filament is very good, as is the finished print, so I probably would buy this again. When my project is complete, I will add pictures more pictures to this review.

My experience with Stronghero3D PLA Galaxy Red,Black,Silk Purple, was great and price was reasonable. I used the Orca Slicer 1.9's calibration tools and dialed it in perfectly on my Ender 3 S1 Pro w- Klipper. Colors vary a bit from the picture...wish my roll had a bit more balance black and purple....but prints look great. My first trial with this brand was with the Poison Dragon. I will buy more and try their other colors

I tried. I really tried with this stuff. I have to say, absolutely gorgeous filament. Everything I print with it comes out looking amazing. Well, the part that finishes looks amazing, because the print never actually finishes. I have yet to get one complete print out of this stuff.It's brittle, snaps right in my hand, clogs like no filament I've used, and refuses to complete a print. I've used just about every brand out there and everything from TPE/U to PLA to PETG etc...nothing, and I mean nothing...has ever given me this much issue. Three rolls purchased, three rolls failed. Several printers tested, several prints tested. I had to order more nozzles because I actually ran out testing this stuff because it kept clogging them up so badly. I tried hotter temps, cooler temps, adjusted speeds...nothing. I'm printing on blue tape and absolutely no adhesion issues at all, but my goodness this stuff loves to clog.Beautiful filament. Just amazing. Will never try nor recommend again. Shame.

This filament is beautiful! The items printed with this, once we got it going right, look fantastic. However, we had a lot of failed prints at first because this filament did not want to stick to print bed at all! We had to play around with the settings a lot and waste a bunch along the way getting things to work with it. It also has caused a couple of nozzle clogs, again resulting in a print fail half way through. I recommend this for the amazing color and shine, but be cautions of clogged and be prepared for a few test prints to get your temps and settings right.

To describe the filament and how it prints I have to be honest, it's absolutely beautiful. It prints just as beautifully once you figure out how to get it to stick to the plate. It is a translucent ruby red with light glitter. When backlit or brightly lit it is raspberry red, but when in shadow or dim lighting it is almost purplish as in drying blood. This would be really great stuff for blood on figurines.I printed a benchy and the quarter millimeter layer lines were almost invisible. And when I did a ringing test with no input shaping and no pressure advance, ringing was almost invisible and the corners looked quite nice as though pressure advanced settings were enabled. In summary once I figured out how to get it to stick to the plate I quite like printing with this stuff even the overhangs came out really nice. I just had to change the way I thought about it not so much as PLA or PETG but something in between.Settings I ended up using with a 0.6mm nozzle were: -0.25 mm layers, -0.6 mm widths -Speeds of 60 mm per second, with the first layer of being at -20 mm per second -8.0 mm wide brim -Nozzle temp of 220 (possibly even higher) -Bed temperature at least 65 (60 was too low) -No fan until the sixth layer (for a benchy) and only about 60% fan for the rest of the print. -1.0 mm retractions at a speed of 60 mm/s (direct drive)Something else I found quite interesting. Everyone has their cursed role of filament that they just can't get to print correctly. Well mine is another roll of filament by the same manufacturer Stronghero3D, but green and black. Labelled as just a PLA, I only really ever tried PLA settings for it, and I never did have any success. So after printing with the red and black stuff I pulled out the green and black and used the exact same settings and made a benchy that is identical to the one made with the red only it's green.

Bonne couleur, parfait

El filamento esta muy bien, pero la entrega del paquete bastante malo, me lo entregaron dañado

I printed six different models in this filament and with other brands. Each model worked beautifully with other brands and, with this one, invariably failed. Recurrent nozzle clogs, gaps, and entire layers failed to print despite apparently optimal settings. See photo for the difference between two back-to-back prints.

This works well for me. Better than the other 4 rolls of crap I got that was not usable

en cuanto a impresión esta bastante bien, no me ha dado ningún problema pero en cuanto al color no me gusto mucho, creo que es para decoraciones muy concretas, sino queda un poco mal.