EZDIY-FABVertical Graphics Card Holder Bracket,GPU Mount,Video Card VGA Support Kit with 20cm/7.8in PCIE 3.0 Riser Cable- White

I bought this hoping it would allow me to use a full-height GPU in my 2U rack case, but alas, it does not. It fits nicely between the power supply and CPU Fan, but the brackets are maybe half an inch too high to close the case when installed. Oh well.The adaptor otherwise seemed of high quality, well-packed and well-designed. It’s a bit fiddle to install because it’s actually a set of flat stamped plates held together with screws - not a single C-shaped piece of metal. But if you’re scared off by that then you shouldn’t be tinkering with your PC on this level to begin with.Oh well. Thank goodness for Amazon’s excellent return policy.

I chose this over the other "name brand" vertical mounts on the market due to the vertical and horizontal adjustability of the EZDIY-FAB.As you can see in the picture, my case and CPU cooler choice did not leave me a lot of room for a vertical mount, and I highly doubt it would have worked with any other mount.I have not noticed any performance degradation, and my temperatures are cooler on both CPU and GPU in this configuration. Bear in mind that PCIe risers are notoriously problematic, especially when going for a cheap option like this. Your mileage may vary, but if you need the flexibility of this mount then the included cable will likely be fine.I love the look of this unique layout, and it was only possible with this mount.

I bought This item for my gpu to be vertically mounted but boy was I in for a surprise. When I booted up my pc the screen kept flickering, games would not start up and every time I would try to update the gpu it would put me in a boot loop. I spent 4 days straight trying to figure out what was going on and as soon as I take out the vertical mount the gpu updated and the screen stopped flickering immediately. JUST WARNING ALL YOU DONT BUY THIS FRAUDULENT GPU MOUNT IT WILL BREAK YOUR GPU. Just warning all you who even think to buy this piece of junk. It looks cool but trust me it’s not worth you gpu becoming broken. 😡😡😡😡

I got my mount to display my MSI RTX 3070. Upon installing it was very flimsy and didn’t support the GPUs weight too well. I think it would work better for smaller 2 fan cards, or maybe I’m doing something wrong. ANYWAYS, upon boot, my monitor was doing all sorts of weird things. Was only recognized as a “Generic PNP monitor” and would only cap at 60 hz even though it was a 144hz monitor and could not change the setting. Investigations show it was the cable as plugging in the gpu normally gave no problems and monitor worked as normal. This said it maybe was just an unlucky cable I received, thus the 3 star. It does look very nice if it’s correctly installed (friend has the same one for his 1070)

So it’s easy enough to install, there are quick instructions, and it’s super easy to figure out. Like some other reviews mentioned, it’s not quite white, it’s an off-white cream color, so if you have a bright white PC, just keep that in mind. It’s not too bad though!My only REAL issue is that it was definitely used before I received it. Packaging was intact, so it must have been repackaged, but as you can see from the picture, it’s already got black circles from where screws had been, and I had JUST gotten it out of the package. Whatever, it’s okay, I’m not planning on returning it, but I don’t think I should have had to pay the full “New” price for an item that is clearly used. :/

Started having choppy/poppy audio after installation. I assume it's because the cable itself is much longer than I need and is bunched up behind the GPU. Either that or the cable isn't good. I'll probably have to buy a better/shorter riser cable to fix the issue. All in all, the mount is worth it but the cable leaves a lot to be desired.Update: 5 Stars because of above and beyond customer service. My first riser cable was faulty so after contacting EZDIY-FAB, they were super understanding and sent me another cable as fast as they could. They're efforts are appreciated and deserving of 5 stars. I highly recommend.

I have a Cooler Master MC500P case with a XFX RX 6700XT GPU. I was using the Cooler Master Vertical GPU Mount (Gen1) with my older RX 590, however the height it mounts at meant I could not use it with the RX 6700XT as it put the cooler around 1/2in (1.27cm) into my Hyper 212 CPU Cooler. I was on studying up on which vertical mount would give me the most compatibility, and this unit did the job well.The best part about this unit is it can be used with cases that have bars between the PCI slots. Also, the construction is very simple yet sturdy, and provides good support for 2 slot cards.

It’s an off color white from my case. Fit is a little weird but works. I wish it was a little higher quality but it’s the only one I could find for my case. One thing I didn’t think of is that the back of your case and the slots will pretty much be wide open if you use all the IO from your gpu

I WISH THESE THINGS DIDNT COST SO MUCH BRAND NEW ! i got mine used sadly , but everything was there except the hdmi thingy you see in the youtube videos . but love the way my aorus 2080ti looks :)

Bu ürünü kullanmanız için ilk önce kaliteli ve atx/matx bir kasaniz olması gerekiyor. Örnek olarak 3 fanli bir ekran kartının kasaniza fazlası ile girmesi lazım. Ürüne geçecek olursak kabloyu takıp vidaları sıkıyorsun ama size tavsiyem sabit durmasını istediğiniz yere çift taraflı bant ile yapıştırmanız daha sağlıklı oluyor. Ekran kartını düzgün ve dikkatli montajlamaniz çok önemli çünkü hassas ve en zayıf olan kısmı ters şekilde taktığınız için pci kısmına zarar verebilir siniz.

Funktioniert leichter Einbau

Ottimo rapporto qualità prezzo, non ho notato nessun calo di prestazioni.

Ürün için biraz sığmayacağı konusunda endişelenmiştim fakat taktığımda montajını hızlı yaptım gayet güzel kullanışlı artık ekran kartım eskisi kadar ısınma problemi yapmıyor ve gayet serin