Electric Mask - On-Demand Fresh Air Smart Face Mask with Filter - Lightweight Silicone Seal Forms to Face - Only HEPA Dual Fan Electronic Mask with 3 Speed Settings with Patented Head Strap

Easiest mask ever to breath in. I'm sure they can't say that it protects against covid but it's a no brainier to know this is better than the cloth masks everyone else is using. Only slight complaint is it's a bit small but easy to adjust to. Customer service is very easy to reach. I will be ordering a 2nd. (I did and still believe it's the best mask)

It doesn't seal well air leaks right around my nose and it doesn't fit well. Also the inside smells like plastic. The silicone is just the part that touches your face but the rest of the mask has a bad cheap plastic oder that makes it pretty unbearable to wear for long.

I like the mask a lot. I must say when you wear it snug it’s a but uncomfortable. It leaves a ring around your face. I love that you can breathe in it though. Good concept and idea.

Great product! Listing is accurate and sellers are legit. Highly recommend if your looking for serious protection and breathability.Also, I'm a full grown man (6'2") with facial hair and the mask fits me great. My wife also has one and it fits her great to so I have a feeling these other folks just didn't take the time to learn how to properly wear it. The customer support team is very responsive. Contact them through the website as they have all kinds of resources available

Great concept. It fits well but is heavy and not comfortable for more than few hours. I recommend chapstick, the air blows inside the mask and chaps the lips.

This mask is awesome. The best. It's definitely hug but if you are looking for something that's full filtering then this is the one. There's no app yet but hopefully they will provide one soon. But I will add getting filters seems extremely hard to do even from the website they provide.

Let me start off by saying that I really wanted to like this mask. The mask itself has this really futuristic design that I love. The filters pop off the front and are extremely easy to change, and the fans that pump fresh and filtered air through the mask work wonders. However, after just a week and a half of use, I have to return this item. As much as I wanted to love this mask, there are too many cons than there are good. And for the premium price, it didn't make it worth it.Let me start off with the absolute biggest problem this mask faces. The straps. Their "patented strap design" is extremely cumbersome and quite frankly, poor quality. Less than 24 hours after owning the mask, I was already emailing their customer service because my strap had been completely frayed. Picture attached for reference. This is because I somehow put on the mask incorrectly, which, I was incredibly delicate with. I will say, that contacting customer service on their end was a breeze. They sent out a replacement within 24 hours and it got to me in just a few days. However, once again right out of the box, the second one frayed on me which was INCREDIBLY infuriating. I ended up super gluing the frayed pieces back together which seemed to fix this. But honestly? There shouldn't need to be an "instructional video" on how to properly put on the mask without the straps fraying. They should be built with material that doesn't fray. Constantly having to worry about the straps fraying killed the charm of the mask for me. I shouldn't be paying $130 for a mask with a strap quality issue. Taking a look at the inside of the mask, it seems that not only is it the straps that may be not the best quality, but the way the straps are pinched inside of the mask to secure them is what's causing the fraying. Instead of these sharp plastic edges that pinch, perhaps in a future model they could implement some sort of door covering or panel that goes over the straps to secure them in place instead.Which leads me to my next issue with the straps themselves. They're incredibly uncomfortable and offer limited mobility in moving your head. Once my mask was securely fitted to my face, that was it. I was only looking forward. Looking up hurt, and I could barely look side to side.Let's talk about the mask itself. It's cool. It's really cool. It's very easy to breathe in and I was pleasantly surprised at how much air I was getting even at the lowest setting. That, I will give it. However, every time I wore this mask for extended periods of time, I was left with painful red marks on my face. Additionally, I started to break out in pimples after each use. I have always had extremely good complexion, never had acne growing up and into my young adult life and I wash my face with skincare products daily. Once this mask was introduced, all of that went down the drain. I tried to wash the mask and my face after and before every use to no avail.Which leads me to the last and I think most important problem when it comes to a mask that is supposed to not only protect YOU but the OTHER people around you: There is an exhaust valve on the bottom of the mask. I am aware that when this mask was first developed, it was invented for use in countries with high pollutants. It only became popular again due to their marketing due to the COVID 19 Pandemic. However, the exhaust valve is a problem that they only partially and made no effort in minimizing for their buyers who bought this specifically for pandemic purposes. If you are unaware of what an exhaust valve is and why it's bad, it essentially allows unfiltered air to be expelled from the mask. When you breathe out, the valve opens and when you breathe in, it closes. Essentially, you are only protecting yourself when wearing this mask. If you are sick, you are putting others around you in danger. **You will not be allowed in many facilities with masks with vents and most/all hospitals.** Having said that, ATMOBLUE did release the 3D Blueprints to create a "plug" for the exhaust valve which I think is kind of a slap in the face. They're essentially saying, "here's the blueprints go figure out the rest yourself." I do not own a 3D Printer, nobody I know owns a 3D Printer. I had to find a service in my city that would create it for me before I even felt comfortable wearing this mask. ATMOBLUE offer all sorts of plate colors, extra straps, but they won't allow you to buy a plug directly from them? It just seems lazy.I was totally apprehensive about returning this mask because I really wanted to like it. However, due to some of these glaring design flaws I have to return it. Perhaps if they created a strap system that went behind the ears I will return to it. In the meantime, I'll be waiting for other tech masks that are supposed to be releasing later this year.

Do not buy this item or purchase any products from this establishment, why won't they at least replace the defective items and I purchased 2 of them so I'm stuck with 2 non working masks that I bought for essential workers in the health care field. This is absolutely unacceptable that I asked for replacements because they won't hold or charge to be of any use. Total waste of my time and money.